Life Fitness Home Gym X9 User Manual

Life Fitness CT5500 and X9 Cross-Trainers  
How To... Install Shaft Collar Service Kit  
Pedal Lever Nuts(2)  
Torque 30-35 ft lbs  
Rocker Arms  
Bolt  
Bolt  
Clevis  
Covers  
Pedal Lever (RT)  
Cover Screws(6)  
Torque  
6-10 in lbs  
Anti-Lift  
Bracket  
Anti-Lift Bolts(2)  
Torque 30-35 ft lbs  
Arm Extension  
Hex Bolt  
Outer Link  
Cover (RT)  
1. Remove the Outer Link Covers by removing six mounting screws from each Outer Link Cover.  
2. Remove the Anti-Lift Bracket by removing two mounting bolts from each Bracket.  
3. Remove the Clevis Covers from the front of each Pedal Lever Assembly  
4. Remove each Pedal Lever Assembly by removing the mounting bolt and nut at each Rocker Arm Joint, and the  
hex nut from each Arm Extension.  
1
M051-00K61-A080  
March 04, 2004  
 
Life Fitness CT5500 and X9 Cross-Trainers  
How To... Install Shaft Collar Service Kit (Continued)  
Snap  
Ring  
Flat  
Washer  
Roller  
Shaft  
Allen-Head  
Cap Screw  
Torque 30-35 ft lbs  
Arm  
Extension  
Collar  
Set Screws  
8. Install the new Shaft Collar (as shown in the illustration above) in place of the discarded washers.  
9. Make sure the Roller turns freely before tightening the Set Screws on the Shaft Collar.  
10. Re-install the Arm Extension, Allen-Head Cap Screw, Pedal Lever Assembly, and Outer Link Cover in reverse  
order. Tighten hardware to specified torque values.  
3
M051-00K61-A080  
March 04, 2004  
 

Kustom Musical Instrument Amplifier 15H User Manual
Laser Portable Speaker SPK Q14BOXBD BK User Manual
Lenmar Enterprises Battery Charger KITCRV3 User Manual
Lenovo Tablet Accessory A1000L User Manual
Lexicon Stereo Receiver RV 8 User Manual
LOREX Technology Digital Camera SG6182SP User Manual
LST Smoke Alarm 2100RFT AS User Manual
Magnavox CRT Television 51MP6200D User Manual
Makita Cordless Saw LSl21l User Manual
Marantz DVD Player DV 12S1 User Manual