Lindy Switch 32586 User Manual

2 Port VGA + Audio Switch  
with Remote Control  
User Manual  
English  
LINDY No. 32586  
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (March 2008)  
 
User Manual  
English  
1. Before starting the installation, please ensure that all the equipment to be used (PCs,  
Monitor, Speakers etc) are switched off.  
2. Connect the first of your video sources to Video Input 1 using a VGA cable (HD-15 Male /  
HD-15 Male) and the first of your audio sources to Audio Input 1 using a Stereo Audio cable  
(3.5mm Male / 3.5mm Male).  
3. Repeat step 2 to connect your second audio and video sources to the secondary inputs on  
the switch.  
4. Connect the Monitor Output of the switch to your monitor using a VGA cable (HD-15 Male /  
HD-15 Male) and then connect the Audio Output to your speakers using a Stereo Audio  
cable (3.5mm Male / 3.5mm Male).  
5. Connect the Remote Control cable to the Remote control Port.  
6. Turn on all the connected equipment.  
7. The installation is now complete. By default Input 1 will be used for Video and Audio when  
the equipment is first powered up.  
The simplest way to switch between inputs is using the supplied Remote Control cable, which  
will allow you to switch back and forth between inputs at the press of a button. When a device is  
powered up (or restarted) the switch will automatically detect this device and switch to it.  
Likewise, when a device is powered down, the switch will automatically switch to the other  
device/input.  
Note: Please use high quality VGA cables, to ensure best image quality we recommend our  
Specification  
PRODUCT NAME  
INPUT  
LINDY VGA + Audio Switch  
VGA HD-15 Female x 2  
3.5mm Stereo Audio Female x 2  
VGA HD-15 Female x 1  
3.5mm Stereo Audio Female x 1  
OUTPUT  
RESOLUTION  
AUDIO CHANNEL  
1920 x 1200  
STEREO  
Automatic detection (Power On/Off)  
Manual selection with Remote Control  
SWITCHING  
METHODS  
No external power adapter required  
POWER INPUT  
Switched channel LED indication  
Metal (Black)  
INDICATOR  
HOUSING  
SIZE (WxDxH) mm  
133 x 60 x 27  
3
 
Radio Frequency Energy, Certifications  
Shielded cables must be used with this equipment to maintain compliance with radio frequency  
energy emission regulations and ensure a suitably high level of immunity to electromagnetic  
disturbances.  
FCC Warning  
This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation.  
This equipment generates, uses, and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or television reception,  
which can be determined by turning the equipment off and on, the user is encouraged to try to  
correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna  
Increase the separation between the equipment and receiver  
Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected  
Consult the dealer or an experienced technician for help  
You are cautioned that changes or modification not expressly approved by the party responsible  
for compliance could void your authority to operate the equipment.  
This device complies with part 15 of the FCC Rules.  
Operation is subject to the following two conditions:  
1. This device may not cause harmful interference, and  
2. This device must accept any interference received, including interference that may cause  
undesired operation.  
WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products  
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of  
all waste electrical and electronic equipment. It is no longer allowable to simply throw away  
electrical and electronic equipment. Instead, these products must enter the recycling process.  
Each individual EU member state has implemented the WEEE regulations into national law in  
slightly different ways. Please follow your national law when you want to dispose of any  
electrical or electronic products.  
More details can be obtained from your national WEEE recycling agency.  
LINDY No 32586  
1st Edition, March 2008  
 

Lasko Electric Heater 5429 User Manual
LG Electronics Washer Dryer WT H550 User Manual
Liebert Stereo System TM 10098 User Manual
Lightolier Indoor Furnishings 1100AICM User Manual
Logitech Webcam C160 User Manual
Lowrance electronic GPS Receiver GlobalMap 3300C User Manual
Magnavox Stereo System MAS 100 37 User Manual
Maytag Washer LAT5914 User Manual
Mellerware Juicer 2 6 1 0 53 0 W User Manual
MGE UPS Systems Switch STS 200A User Manual