Linear Pacemaker DXT 31 User Manual

DXT-31  
DXT-31  
TRANSMITTER  
TEST/OPERATE  
INDICATOR  
BY  
NOTCH ON SIDE OF  
TRANSMITTER  
DOOR/WINDOW  
TRANSMITTER  
ALIGN MAGNET  
NEXT TO NOTCH  
Installation Instructions  
PUSH CASE  
TO TEST  
MAGNET  
1/2" SPACE  
MAXIMUM  
(619) 438-7000 FAX (619) 438-7043  
USA & Canada (800) 421-1587 & (800) 392-0123  
Toll Free FAX (800) 468-1340  
PRODUCT DESCRIPTION  
The DXT-31 is a battery powered stationary transmitter designed for use with Linear’s DX Format The transmitter is powered from two 3-Volt #2032 lithium batteries with an expected battery life of  
receivers. This transmitter can be used in a limitless number of wireless remote control applications. up to 3 years. The red test/operate indicator lights during operation and test. It will blink during  
Triggering the transmitter with its built-in magnetic switch, an external switch or an external glass operation and test when the batteries are low.  
break detector sends a digitally coded wireless signal to its companion receiver. Pressing the  
transmitter’s case sends a test transmission.  
A three-position terminal block is for connection to normally closed external contacts or a normally  
open “Window Bug” type glass break sensor. An internal jumper selects which input to use.  
The digital DX code format features over a million possible codes. The DX transmitters are precoded Selections are: internal switch only, external switch only, both external and internal switch, and glass  
at the factory to unique codes, so no field coding is required. The DXT-31 can send three different break sensor.  
codes: alarm, restore and low battery.  
A snap-on transmitter mounting plate is provided for easy installation. The magnet has four height  
For versatility, any transmitter can be programmed into any receiver channel. Receivers must be positions. An additional snap-on magnet spacer is provided for a total of eight magnet positions.  
programmed to the transmitter code before system testing and operation. Refer to the receiver’s  
instructions for details on programming.  
NOTE: Functioning of the slide switch marked INSTANT and DELAYED on the bottom of the  
DXT-31 depends on the receiver used. With some receivers, it has no function.  
In a typical installation, the magnet is mounted on a door or window and the transmitter is mounted  
ADJUSTABLE  
MAGNET  
MOUNTING  
TAPE  
on the frame. When the magnet moves more than 1/2" away from the transmitter, an alarm signal  
is sent. When the magnet returns next to the unit, a restore signal is sent. Alarms and restores can  
also be sent from external contacts wired to the terminal block. Pressing the case sends a test  
transmission that indicates the current state of the contacts.  
MOUNTING  
SCREWS  
MOUNTING  
PLATE  
DXT-31  
TRANSMITTER  
MAGNET  
SPACER  
OPENING CASE  
COMPONENT LOCATIONS  
BATTERIES  
PUSH SCREWDRIVER  
THROUGH HOLE TO  
RELEASE MOUNTING  
PLATE  
INTERNAL  
(TYPE 2032)  
REED  
TEST/OPERATION  
INDICATOR  
OPEN  
SWITCH  
OPTION  
JUMPER  
OPEN TRANSMITTER  
1
2
3
TEST  
BUTTON  
TO ACCESS BATTERIES,  
TERMINAL BLOCK, OPTION  
JUMPER AND MOUNTING PLATE  
TERMINALS  
1-EXTERNAL  
2-COMMON  
3-GLASS BREAK  
RELEASE TAB  
TERMINAL  
BLOCK  
PRY  
EXAMPLE DOOR INSTALLATION  
EXAMPLE WINDOW INSTALLATION  
OPENING WINDOW MOVES  
MAGNET AWAY FROM  
TRANSMITTER  
INDICATOR  
LIGHTS DURING  
TRANSMISSION  
INDICATOR  
LIGHTS DURING  
TRANSMISSION  
OPENING DOOR  
MOVES MAGNET  
AWAY FROM  
TRANSMITTER  
TRANSMITTER  
MOUNTS ON  
FRAME  
MAGNET MOUNTS  
TRANSMITTER  
ON DOOR  
MOUNTS ON  
FRAME  
 

KWC Indoor Furnishings K26VB02700 User Manual
Learning Resources Building Set LER 1909 User Manual
Learning Resources Kitchen Utensil LER 0360 User Manual
Legacy Car Audio Car Video System L7HM User Manual
Lennox Hearth Blower CI1500 User Manual
Lenovo Network Hardware 70BJ9005WW User Manual
Lenoxx Electronics Telephone IB PH5595 User Manual
Line 6 Musical Instrument Amplifier Flextone Cab 212S User Manual
Magnavox VCR VR201BMG User Manual
Marantz Stereo System CC4300 User Manual