Magnadyne Car Video System M135C 4 User Manual

Owner’s/Installation Manual  
+
MENU  
CAM  
MODE  
POWER  
-
7” Color LCD Monitor  
Model: M135C-4  
For Technical Assistance, please call (800) 638-3600,  
 
Monitor Features and Controls  
+
MENU  
CAM  
MODE  
POWER  
-
1
2
3
4
5
6
7
+
4. Camera Display Configuration Button  
(MODE): Press to select different camera  
display configurations.  
5. Power Button: Press to turn the monitor  
on or off.  
6. IR Sensor: Receives signal from the  
remote control.  
7. Speaker  
1. Volume Buttons ( and ): Press to adjust  
the speaker’s volume.  
-
2. Menu Button: Press to access the monitor’s  
adjustment features.  
3. Camera Selection Button (CAM): Press to  
select the desired camera view: Left, Right,  
Front or Rear.  
Remote Control Functions  
MODE  
1
4
5
MENU  
2
3
CAM 1 = Left Side Camera  
CAM1  
CAM3  
CAM2  
CAM 2 = Right Side Camera  
CAM4  
CAM 3 = Front Camera  
CAM 4 = Rear Camera  
1. Screen Display Selection Button (MODE):  
Press to adjust the screen’s camera views.  
3. Camera(s) Display Configuration Button  
(MODE): Press to select different camera  
display configurations.  
2. , , or Navigation Buttons: Press  
these buttons to adjust the speaker’s vol-  
ume or adjust the selected menu function.  
4. Power Button: Press to turn the screen on  
or off.  
5. Menu Button: Press to access the monitor’s  
adjustment features.  
3
 
General Operation  
Turning the Monitor On:  
The monitor is operational by activating the ignition  
key then manually pressing the power switch on the  
unit.  
MENU  
CAM  
MODE  
POWER  
Selecting the Camera View  
Press to select the desired camera view.  
+
MENU  
CAM  
MODE  
POWER  
-
Note: When the camera is automatically selected (Example:  
the vehicle is put into reverse) the camera image will  
automatically override the selected camera image.  
Adjusting the Speaker’s Volume  
+
Press these buttons (- or ) to adjust the speaker’s  
volume.  
+
MENU  
CAM  
M
-
Configuring Monitor’s Camera Display  
Press the MODE to select the desired camera display  
configuration.  
+
MENU  
CAM  
MODE  
POWER  
Note: When the camera is automatically selected (Example:  
the vehicle is put into reverse) the camera image will  
automatically override the selected camera display.  
RIGHT  
LEFT  
Camera  
Display  
Configurations  
REAR  
FRONT  
RIGHT  
LEFT FRONT  
REAR  
RIGHT  
LEFT  
FRONT  
REAR  
4
 
General Operation  
Monitor Adjustment  
To access the monitor adjustment features, press the  
MENU button. Use the - or buttons to make adjust-  
+
MENU  
CAM  
MODE  
POWER  
-
+
ments to the selected function.  
Menu Functions:  
• Brightness  
• Contrast  
• Saturation  
• Hue  
+
MENU  
CAM  
M
-
• Volume  
• Language  
• Rotating  
• Rotating  
• Mirror 1  
• Mirror 2  
• Mirror 3  
• Mirror 4  
• Reset  
Wiring Diagram  
Red Wire: 12 Volt Switched  
Purple Wire: Trigger Camera 4 (Rear)  
Black Wire: Ground  
Yellow Wire: Trigger Camera 3 (Front)  
Brown Wire: Trigger Camera 2 (Right Side)  
Green Wire: Trigger Camera 1 (Left Side)  
Camera 1  
Left View Camera  
Camera 2  
Right View Camera  
Camera 3  
Front View Camera  
Camera 4  
Rear View Camera  
5
 
Installation Instructions  
Pedestal Mounting the Monitor  
1. Loosen the thumb wheel on the base support so the nut attached to the thumb wheel  
can slide into the monitor’s mounting channel.  
2. Slide the thumb wheel nut into the channel on the back of the monitor  
.
3. Position the monitor to the desired height and tighten the base support thumb wheel.  
4. Adjust the tilt knob.  
5. Use the double-sided foam (supplied) or mounting screws (not supplied) to secure the base  
support to the desired location  
.
Monitor’s  
Mounting  
Channel  
Base Support  
Thumb Screw  
Nut  
Tilt Knob  
Double Sided  
Mounting Foam  
6
 
Technical Specifications  
Display Size: 7-inch  
Display Format: 16:9  
System: PAL/NTSC  
Power Supply: 12-32V  
Power: 12W  
Picture Resolution: 800x480  
7
 
Warranty  
ONE (1) YEAR LIMITED WARRANTY  
Magnadyne Corporation or its authorized agents will within one year from the date of sale  
to you, repair, replace or refund the retail sales price of said product or any part thereof, at  
the option of the Magnadyne Corporation or its authorized agents, if said product or part  
is found defective in materials or workmanship, when properly connected and operating  
on the correct power requirements designated for the specific product. This warranty and  
Magnadyne Corporation or its authorized agent’s obligations hereunder do not apply where  
the product was; damaged while in the possession of the consumer, subjected to unrea-  
sonable or unintended use, not reasonably maintained, utilized in commercial or industrial  
operations, or serviced by anyone other than Magnadyne Corporation or its authorized  
agents, or where the warning seal on the product is broken or the power and/or plugs  
are detached from the unit. Magnadyne Corporation or any of its authorized agents will  
not assume any labor costs for the removal and reinstallation of any product found to be  
defective, or the cost of transportation to Magnadyne Corporation or its authorized agents.  
Such cost are the sole responsibility of the purchaser.  
This warranty does not cover the cabinet appearance items or accessories used in con-  
nection with this product, or any damage to recording or recording tape, or any damage  
to the products resulting from improper installation, alteration, accident, misuse, abuse or  
acts of nature.  
MAGNADYNE CORPORATION OR ITS AUTHORIZED AGENTS SHALL NOT BE LIABLE TO  
ANYONE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES OR CLAIMS EXCEPT THOSE  
ACCORDED BY LAW. NO EXPRESSED WARRANTY OR IMPLIED WARRANTY IS GIVEN  
EXCEPT THOSE SET FORTH HEREIN. NO IMPLIED WARRANTY SHALL EXTEND BEYOND  
ONE YEAR FROM THE DATE OF SALE.  
This warranty extends only to the original purchaser of the product and is not  
transferable. Some states do not allow limitations on how long an implied warranty lasts,  
and some states do not allow the exclusion or limitation of incidental or consequential  
damages, so the above limitations or exclusion may not apply to you. This warranty gives  
you specific legal rights, and you may have other rights that vary from state to state.  
“NOTE: The manufacturer is not responsible for any radio or TV interference caused by  
unauthorized modifications to this equipment. Such modifications could void the User’s  
authority to operate the equipment.”  
Defective merchandise should be returned to the original point of purchase or  
secondly, to Magnadyne Corporation, 1111 W. Victoria Street, Compton CA 90220.  
Return Authorization must be obtained before sending, or merchandise may be refused.  
Copyright © 2011 MobileVision  
M135C-4-UM Rev. A 6-17-11  
 

Lexmark All in One Printer 950DE User Manual
Linksys Indoor Fireplace RDI 36 H HCI 36 H User Manual
Linksys Network Card WUSB200 User Manual
Lopi Indoor Fireplace BLACK 99300496 User Manual
Lux Products Thermostat 52157 User Manual
Magnavox Pet Fence FW58 User Manual
Maytag Cooktop MEC5430 User Manual
Maytag Water Heater HV640HBVITCGA User Manual
Meridian America Portable Speaker DSP5500HC User Manual
Metabo Grinder 600166420 User Manual