Magnadyne Car Video System MV850 User Manual

Owner's Manual  
Mobile DVD/CD Player  
with 8.5" TFT Monitor  
Model: MV850  
For operational or technical assistance, after reading this manual,  
 
Contents  
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Basic Operation and Special Functions . . . . . . 9-11  
Turn the Unit On. . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Loading a DVD/CD Disc . . . . . . . . . . . . . . . . . . . 9  
Ejecting a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Play Function . . . . . . . . . . . . . . . . . . . . . . . . . 9-10  
DVD Special Functions . . . . . . . . . . . . . . . . . 10-11  
CD Special Functions. . . . . . . . . . . . . . . . . . . . . 11  
MP3 Function . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Setup Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . 11-14  
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Wiring Diagram. . . . . . . . . . . . . . . . . . . . . . . . 16-17  
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Replacement Parts . . . . . . . . . . . . . . . . . . . . . 19-20  
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Disc Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Screen and DVD/CD Functions . . . . . . . . . . . . . . 5-7  
Location of Functions. . . . . . . . . . . . . . . . . . . . . . 5  
Adjusting the Monitor. . . . . . . . . . . . . . . . . . . . . . 6  
Inserting a DVD/CD . . . . . . . . . . . . . . . . . . . . . . . 6  
Changing to an Auxiliary Input Source. . . . . . . . . 6  
Screen’s Remote Control Sensor . . . . . . . . . . . . . 7  
Screen’s Wireless Transmitter Module. . . . . . . . . 7  
Screen’s Dome Lights . . . . . . . . . . . . . . . . . . . . . 7  
Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . 8-9  
Remote Control Functions . . . . . . . . . . . . . . . . 8-9  
Safety Information  
CAUTION:  
This product incorporates copyright protection technology  
that is protected by method claims of certain U.S. patents  
and other intellectual property rights owned by Magnadyne  
Corporation and other rights owners. Use of this copyright  
protection technology must be authorized by Magnadyne  
Corporation and is intended for home and other limited  
viewing uses only unless otherwise authorized by  
Magnadyne Corporation. Reverse engineering or disas-  
sembly is prohibited.  
THIS MOBILE DVD PLAYER IS A CLASS I LASER PROD-  
UCT. HOWEVER, THIS MOBILE DVD PLAYER USES A  
VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE  
HAZARDOUS RADIATION EXPOSURE IF DIRECTED.  
BE SURE TO OPERATE THE MOBILE DVD PLAYER  
CORRECTLY AS INSTRUCTED. USE OF CONTROLS OR  
ADJUSTMENTS OR PERFORMANCE OF PROCEDURES  
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN  
HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COV-  
ERS AND DO NOT REPAIR YOURSELF. REFER SERVICING  
TO QUALIFIED PERSONNEL.  
Region Management Information:  
This Mobile DVD Player is designed and manufactured to  
respond to the Region Management Information that is  
recorded on a DVD disc. If the Region number described  
on the DVD disc does not correspond to the Region num-  
ber of this Mobile DVD Player, this Mobile DVD Player  
cannot play this disc.  
CAUTION:  
FCC REGULATIONS STATE THAT ANY UNAUTHORIZED  
CHANGES OR MODIFICATIONS TO THIS EQUIPMENT  
MAY VOID THE USER’S AUTHORITY TO OPERATE IT.  
WARNING:  
• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,  
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR  
MOISTURE.  
• THIS DEVICE IS INTENDED FOR CONTINUOUS OPER-  
ATION.  
• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK  
AND ANNOYING INTERFERENCE, USE ONLY THE  
RECOMMENDED ACCESSORIES.  
3
 
Disc Notes  
Disc Formats Supported by this Player:  
DVD-R/DVD-RAM  
Discs which cannot be played with this player:  
• DVD-ROM  
• CDV  
• CD-G  
Disc Handling  
• Dirt, dust, scratches and warping disc will cause  
non operation.  
• Do not place stickers on disc or scratch disc.  
• Do not warp discs.  
Preparing New Discs with Rough Spots  
A new disc may have rough edges on its inside and  
outside edges. If a disc with rough edges is used, the  
proper setting will not be performed and the player will  
not play the disc. Therefore, remove the rough edges  
in advance by using a ball point pen or pencil as  
shown. To do this, press the side of the pen or pencil  
against the inside and outside edges of the disc.  
• A disc should always be kept in its case when not  
in use to prevent damage.  
Do not place discs in the following places:  
1. Direct sunlight.  
2. Dirty, dusty and damp areas.  
3. Near car heaters.  
4. Car seats or dashboard.  
Disc Cleaning  
Use a dry soft cloth to wipe the surface. If the disc is  
quite dirty, use a soft cloth slightly moist with isopropyl  
(rubbing) alcohol. Never use solvents such as benzine,  
thinner or conventional record cleaners as they may mar  
the surface of the disc.  
Note: A disc may become somewhat scratched  
(although not enough to make it unusable) depending  
on handling and conditions in the usage environment.  
4
 
Screen and DVD/CD Functions  
16  
17  
15  
18  
7
8
9
10 11 12 13 14  
1
2
3
4
5
6
1. POWER Button: Press this button to turn the unit 9. NEXT Button: In DVD/CD mode, pressing this button  
On/Off.  
searches for the beginning of the next track or chapter.  
10. AUDIO Button: Changes the audio soundtrack on  
multi-audio soundtrack DVD disc.  
11. PBC Button: Used for playback of video CDs.  
2. MODE Button: Press this button to change the play  
source between DVD/CD player and an auxiliary input  
source.  
3. MENU Button: Activates the monitor adjustment  
12. STOP Button: Stops play of picture or audio.  
menu.  
13. PLAY Button: Press the button to play or stop tem-  
4. UP Button: Adjusts the monitor’s level in menu mode.  
porarily.  
5. DOWN Button: Adjust the monitor’s level in menu  
14. EJECT Button: Press to eject the disc.  
mode.  
15. Disc Slot: To play a DVD/CD, insert a disc into slot  
6. PREV Button: In DVD/CD mode, pressing this button  
searches for the beginning of the previous track or  
chapter.  
with label facing forward.  
16. Viewing Screen Release: To release the screen, push  
the tab then pull down the screen. Place the screen to  
the desired viewing position.  
7. Infrared Remote Sensor: This is the sensor for the  
infrared remote.  
17. Dome Light Switch: Switch to the ON position to  
8. Infrared Wireless Transmitter Module: The audio  
signal is converted to an infrared light and transmit-  
ted to headphones.  
activate the dome lights.  
18. Dome Lights  
5
 
Screen and DVD/CD Functions  
Turning the Unit On:  
Inserting a DVD/CD  
Press the POWER on either the remote or the screen  
housing.  
Label Side  
Facing Forward  
Adjusting the Monitor:  
1. Press the MENU button to activate the monitor  
adjustment menu. The following will be displayed  
on the screen:  
Label  
2. Use the UP and DOWN buttons on the screen  
housing to adjust the screen color.  
3. Press the MENU button again to select the next  
desired monitor adjustment item.  
To play a DVD/CD, insert a disc into slot with label  
side facing forward.  
Last Memory  
After the engine is turned “Off” or the unit is powered  
“Off”, the unit will resume play at the point play was  
interrupted when the unit is turned back on again.  
Changing to an Auxiliary Input Source  
Press the MODE button to change the play source  
between DVD/CD player and an auxiliary input  
source. “GAME IN” will be displayed on the screen.  
4. Press the MENU button again until the monitor  
adjustment menu disappears or wait 10 seconds  
and the menu will automatically disappear.  
Note: When pressing the MENU button after the  
Contrast screen “AV MODE DVD” appears on the  
screen. If the UP or DOWN button is pushed either  
“DVD” or “GAME IN” will appear permanently on the  
screen. To eliminate the words from permanently  
appearing on the screen press the MENU button 6  
times.  
6
 
Screen and DVD/CD Functions  
Screen’s Remote Control Sensor:  
Screen’s Dome Light:  
Dome Light Switch  
Screen’s Remote  
Control Sensor  
Dome Lights  
To turn on the dome lights, slide the dome light  
switch to the On position. Slide the dome light switch  
to the Off position to turn them off.  
Screen’s remote control sensor receives the remote’s  
infrared control signals.  
Note: The dome lights will not automatically illumi-  
nate whenever the vehicle doors are open. The lights  
must be activated manually.  
Screen’s Wireless Transmitter Module:  
Screen’s Wireless  
Transmitter Module  
Optional IR Headphone  
Model: HP-400  
The audio signal is transmitted via infrared light to  
the headphones.  
7
 
Remote Control Locations  
8. PROG:  
Press the button to program the play  
order of CD tracks.  
13  
14  
9. PREV/NEXT: Press these buttons to search for  
the beginning of track or chapter.  
POWER  
TITLE  
MODE  
EJECT  
10. REV/FWD:  
Scan backward and forward.  
1
2
3
4
5
6
7
15  
16  
11. SLOW:  
Press the button to slow play DVD to  
1/2, 1/4, 1/8, 1/16, or 1/32 speed.  
AUDIO  
ANGLE  
1
4
2
5
8
0
3
6
12. REPEAT:  
For DVD’s, press the button to repeat  
title or chapter. For CD’s, press the  
button to repeat a track or the entire  
disc. For MP3’s, press the button to  
repeat file, directory or the entire disc.  
SUBTITLE  
DISPLAY  
SETUP  
7
9
17  
18  
SEARCH  
10+  
13. TITLE:  
Display DVD’s title.  
PLAY/PAUSE MENU  
14. MODE:  
Select DVD and auxiliary inputs func-  
tions.  
STOP  
15. EJECT:  
Ejects the disc.  
ENTER  
19  
20  
21  
PROG  
PREV  
CLEAR RETURN  
16. 0 - 9:  
Press these buttons to input num-  
bers.  
8
9
NEXT  
FWD  
STEP  
A-B  
VOL–  
ZOOM  
PBC  
VOL+  
17. SEARCH:  
18. MENU:  
19. STOP:  
Locate title, chapter, time and play.  
Display DVD’s menu screen.  
Stop play of picture or audio.  
REV  
TFT/POWER  
MENU  
10  
22  
23  
24  
25  
SLOW  
REPEAT  
20. RETURN:  
Press the button to return to previ-  
ous item.  
11  
12  
MUTE  
ROTATE  
21. VOL-/VOL+: Press these buttons to decrease or  
TFT  
FUNCTION  
increase volume level.  
22. TFT ON/OFF: Turns LCD power On/Off.  
23. MENU:  
Press the button to change the  
screen’s settings: Color, Hue,  
Brightness, Contrast. To adjust the  
screen’s settings use the screen’s Up  
and Down buttons or the remote  
1. POWER:  
Turns the unit On/Off.  
2. AUDIO:  
Press the button to change audio  
languages.  
controls  
buttons.  
24. ROTATE:  
Rotates the picture on the screen.  
3. ANGLE:  
4. SUBTITLE:  
5. DISPLAY:  
6. SETUP:  
7. ENTER:  
Press the button to change DVD’s  
picture angle.  
25. MUTE:  
Press the button during play to stop  
audio.  
Press the button to change DVD’s  
subtitle languages.  
Press the button to display disc  
information.  
Press the button to enter or cancel  
SETUP MENU.  
Press the button to enter setting.  
8
 
Remote Control Locations and Operation  
BASIC OPERATION  
Turn the Unit On  
POWER  
TITLE  
MODE  
EJECT  
1. Turn the car ignition on to the accessory position.  
2. Press the POWER button.  
AUDIO  
ANGLE  
1
4
2
5
8
0
3
6
Loading a Disc  
1.Insert the disc with printed side facing forward into  
the disc slot. The player will automatically search  
the disc.  
SUBTITLE  
DISPLAY  
SETUP  
7
9
SEARCH  
Volume Level Adjustment  
Press the VOL or VOL buttons on the remote to  
10+  
+
-
PLAY/PAUSE MENU  
29  
30  
increase or decrease volume level.  
STOP  
26  
ENTER  
Muting the Sound Level  
PROG  
PREV  
CLEAR RETURN  
Press the MUTE button during play to stop audio.  
Press the MUTE button again to restore sound to the  
previous level.  
NEXT  
FWD  
STEP  
A-B  
VOL–  
ZOOM  
PBC  
VOL+  
REV  
TFT/POWER  
MENU  
Ejecting a Disc  
Press the EJECT button to eject disc.  
31  
32  
SLOW  
REPEAT  
27  
28  
MUTE  
ROTATE  
PLAY FUNCTION  
TFT  
FUNCTION  
Stopping Play  
Press the STOP button to stop the disc playback.  
Press the PLAY/PAUSE button on the remote to con-  
tinue with normal playback at the position it was  
stopped. When the disc is removed or the STOP but-  
ton is pressed again, the resume function is cancelled.  
26.  
Use CURSOR buttons when selecting  
setting items or to move cursor up,  
down, left or right.  
Pausing Play  
Press the PLAY/PAUSE button to pause disc during  
playback. Press the button again to resume play.  
27. STEP:  
For DVD frame-by-frame play.  
28. A-B:  
Press the button during play to set  
point A and point B, then program A  
and B will be played repeatedly.  
Press the button again to cancel.  
Scan Forward and Backward  
Press the REV or FWD button to scan backward or  
forward.  
29. PLAY/PAUSE: Press the button to play or stop tem-  
porarily.  
Return to Previous Chapter or Track  
Press the PREV button during playback and the play  
returns to the beginning of the previous chapter or  
track.  
30. CLEAR:  
Clear numbers which have been  
input.  
31. ZOOM:  
Press the button during playback of  
DVD to enlarge an area on the  
screen.  
32. PBC:  
Video disc playback control. DVD’s  
subtitle languages.  
9
 
Basic Operation and Special Functions  
PLAY FUNCTION (Continued)  
DVD SPECIAL FUNCTIONS  
Slow Play  
Advance to Next Chapter or Track  
Press the NEXT button during playback and the play  
advances to the beginning of the next chapter or  
track.  
Each time the SLOW button is pressed during DVD  
play the speed is reduced as follows:  
Normal Playback 1/2 1/4 1/8 1/16 1/32  
Removing Disc  
Press the STOP button, then press the EJECT button  
to eject the disc.  
Step Play (Frame by Frame)  
Pressing the STEP button will pause DVD play.  
Pressing the STEP button again will advance play to  
the next frame. Repeated pressing will advance the  
DVD frame by frame. Press the PLAY button to can-  
cel this feature.  
Searching for a Specific Chapter or Track  
1. Press the SEARCH button on the remote.  
2. Press numerical key to select track, chapter or  
time.  
3. Press ENTER or PLAY to play the selected track,  
chapter or time.  
Display DVD Menu Screen  
1. Press the MENU button to display the menu  
screen of the DVD.  
2. Use the cursor button to select item.  
3. Press ENTER or PLAY to play the selected.  
Repeat Play  
For DVD’s, press the REPEAT button to repeat title or  
chapter.  
For CD’s, press the REPEAT button to repeat a track or  
the entire disc.  
For MP3’s, press the REPEAT button to repeat file,  
directory or all.  
A-B Repeat  
View Angles of DVD  
Press the ANGLE button to select the different angles  
to view.  
Note: If the DVD doesn’t have multi-angle function,  
this function isn’t applicable.  
Press the A-B button during play to set point A then  
press again to set point B. The system will repeated-  
ly play the programmed section until the A-B button  
is pressed again which cancels the function.  
DVD Zoom  
Press the ZOOM button during playback of DVD to  
enlarge an area on the screen.  
Note: In zoom mode, press the CURSOR buttons to  
move images up, down, left or right to find the desire  
image to zoom in on.  
10  
 
Special Functions and Setup Menu  
DVD SPECIAL FUNCTIONS (Continued)  
SETUP MENU  
1. Press the SETUP button on the remote control, and  
the setup menu will be displayed. Pressing SETUP  
during disc play will pause play. Play will resume  
when the setup screen is cancelled.  
Multi-Subtitle Language Function  
Press the SUBTITLE button during playback. Each  
time the button is pressed the subtitle language on  
the screen changes.  
2. Use the CURSOR buttons  
to select  
desired function.  
Multi-Audio Language Function  
3. Press the ENTER button to confirm the selection.  
Press the AUDIO button during playback. Each time  
the button is pressed the audio soundtrack language  
on the screen changes.  
CD SPECIAL FUNCTIONS  
Program CD Play  
1. While the CD is playing push the STOP button  
twice (x2).  
2. Use the CURSOR buttons to select the first  
desired track. Then press ENTER button to con-  
firm. For additional tracks repeat Step 2.  
3. Press PLAY button to start Program Play.  
Note:  
Random CD Play  
1. While the CD is playing push the STOP button  
twice (x2).  
Setup the "DISC" function when there is no disc in  
the DVD player. This function is not available during  
disc playback.  
Press the RETURN button to go back to the last set-  
ting. For example, if you input the wrong password  
in the "PARENTAL LOCK" function, press the  
RETURN button to return to the last setting so the  
password can be input again.  
2. Push the PROG buttons twice (x2) to bypass the  
programming screen.  
3. “CD Random” will be displayed, then push PLAY  
button to start Random CD Play.  
MP3 FUNCTION  
Descriptions of the Setup Menu Functions:  
DISC - Disc Setting  
VIDEO - Video Setting  
AUDIO - Audio Setting  
DISPLAY - OSD Language Setting  
OTHERS - Other Functions Setting  
This unit supports MP3 discs. Use the CURSOR but-  
tons to move the cursor through the MP3 directory.  
Then push ENTER to play desired file.  
Note: While a disc is playing, push the PRE or NEXT  
button to play the previous or next file on the disc.  
11  
 
Setup Menu  
DISC SETTINGS  
Menu Language Setting  
Use the CURSOR buttons  
to make DISC  
Use this screen to setup the disc menu language.  
setting selections. Press the ENTER button to confirm  
the setting.  
Parental Lock Rating  
Audio Setting  
Use this screen to setup the audio language on multi-  
language discs.  
Use this screen to setup the Parental Lock Rating. This  
function helps restrict viewing movies with certain rat-  
ings (e.g., PG-13, R, etc.) as supported by each DVD.  
Subtitle Language Setting  
Use this screen to setup the subtitle language on  
multi-subtitle language discs.  
Parental Lock Password Setting  
Use this screen to setup a four-digit parental lock pass-  
word. On the remote control, use this NUMERIC keys to  
enter the password. Press the ENTER button to confirm the  
password.  
12  
 
Setup Menu  
AUDIO SETTINGS  
VIDEO SETTINGS  
Use the CURSOR buttons  
VIDEO setting selections. Press the ENTER button to  
to make  
Use the CURSOR buttons  
AUDIO setting selections. Press the ENTER button to  
to make  
confirm the setting.  
confirm the setting.  
TV Aspect Setting  
Use this screen to setup the desired TV Aspect  
Ratio.  
DISPLAY SETTINGS  
Use the CURSOR buttons  
Language setting selections. Press the ENTER button  
to make OSD  
to confirm the setting.  
Still Mode Setting  
Use this screen to setup the mode to display still pic-  
tures. Choose between three modes: Auto, Field and  
Frame.  
OSD Language Setting  
Use this screen to setup the desired OSD Language.  
13  
 
Setup Menu  
OTHER FUNCTION SETTINGS  
Use the CURSOR buttons  
OTHERS setting selections. Press the ENTER button  
to confirm the setting.  
to make  
Last Play Function  
The Last Play function automatically bookmarks the  
position on a DVD/CD disc and remembers the play-  
back settings. Playback will resumes at the position  
which the player was turned off, the disc was ejected,  
or the power was cut off.  
Turning Off Last Play Function  
Press the SETUP button to display the main menu. Then  
use the CURSOR buttons to select the OTHERS menu,  
then LAST PLAY and ON. Press the ENTER button to  
confirm the setting.  
JPEG Time Setting  
Use this screen to setup the JPEG image display  
time from 1 to 180 seconds.  
Default Settings  
Use this screen to reset all menus to the factory  
default setting.  
14  
 
Installation  
2a  
1
Ceiling  
Support  
Beams  
de  
i
st  
n
S
is  
ai  
in  
g
Th  
A
g
s
nt  
l
ei  
u
C
Mo  
f/  
Roo  
Disassemble the metal support bracket from  
the unit by unscrewing the six screws.  
Mount support bracket using screws  
(not supplied) with the “This Side Mounts  
Against Roof/Ceiling” label against ceiling  
support beam(s).  
Warning: Take extra care to not penetrate the  
roof of your car.  
Movievision Bracket  
(not supplied)  
MV850  
Bracket  
2b  
3
MV850  
Bracket  
Optional:  
Some vehicles may require an optional  
custom MovieVision bracket. The long  
slots in the MV850 mounting bracket  
match up to the screw holes on the  
MovieVision bracket.  
Attach the screen housing to the metal support  
bracket using the screws removed in Step 1.  
15  
 
Wiring Diagram  
Audio Video Input (Female RCA)  
Yellow (Video In)  
Red (L-Audio In)  
Red (R-Audio In)  
Mini DIN Connector  
Audio Video Output (Female RCA)  
Yellow (Video Out)  
White (L-Audio Out)  
White (R-Audio Out)  
3 AMP  
Red Wire - Ignition  
Black Wire - Ground  
3 AMP  
Yellow Wire - Battery  
16  
 
Wiring Instructions  
Power Harness Wiring:  
Yellow Wire: The yellow wire in the harness should  
be connected to a constant +12 volt wire that is  
NOT turned on and off by the position of the igni-  
tion key.  
The 3 wire harness provides battery and ignition 12  
volts as well as a chassis ground. Route the power  
harness to the point in the vehicle that you will make  
the connections.  
Black Wire: The black wire in the harness should be  
connected to the chassis of the vehicle using a  
ring terminal and self tapping screw or bolt and  
nut.  
Red Wire: The red wire in the harness should be con-  
nected to a +12 volt power wire that is turned on  
and of by the position of the ignition key.  
Specifications  
Supply Voltage: 12V DC, Negative Ground  
Current Consumption: 20 watts maximum  
Screen Format: 16:9  
Resolution: 480 x 234 pixels  
A/V input:  
A/V output:  
1
1
Compatible Discs: DVD-Video Disc: DVD 8cm or 12 cm disc  
(single/double-sided discs)  
Compact Disc: CD 12 cm disc  
MP3: MP3 12 cm disc  
IR Transmitter: Yes  
Dimensions (mm): 260(w) x 245(d) x 48(h)  
17  
 
Troubleshooting  
Only qualified service personnel can remove the No Sound:  
cover or service this player. Otherwise the warranty  
will become invalid.  
• Check audio connections.  
• If using a Hi-Fi amplifier, try another sound source.  
No Power:  
Disc Does Not Play:  
• Ensure the disc label is facing forward.  
• Clean the disc.  
• Check to see if the disc is defective by trying anoth-  
er disc.  
• Check to see if the player is set to “On”.  
• Check to see that the power plug of the main unit is  
properly connected.  
• Check to see if that power to the outlet is properly  
working.  
The Player Does Not Respond to the Remote Control:  
• Aim the remote control directly at the sensor on the  
front of the housing.  
No Picture:  
• Check to see that the monitor is switched to “On”.  
• Check that the correct Mode is selected (DVD or AV)  
by pushing the MODE button.  
• Avoid all obstacles which may interfere with the sig-  
nal path.  
• Check the video connection.  
Inspect or replace the remote control batteries.  
Distorted Picture:  
Buttons Do Not Work:  
• Press POWER to turn “Off” the unit, then press it  
again to turn “On” the unit.  
• Check the disc for fingerprints and clean with soft  
dry cloth, wiping from center to edge.  
• A small amount of picture distortion may appear. This  
may not be a malfunction.  
Volume different for DVD and CD:  
• This is due to different recording methods  
18  
 
Replacement Parts Order Form  
Send Orders To: Magnadyne Corporation  
We Accept Checks, Money Orders, Visa and Master Card  
ATTN: Consumer Parts Sales  
Make Checks Payable to: Magnadyne Corporation  
P.O. Box 5365  
Carson, CA 90749-5365  
SHIP TO: (No P.O. Boxes)  
LAST NAME  
FIRST NAME  
INITIAL  
STREET ADDRESS (IF PAYING WITH A CREDIT CARD, YOUR BILLING ADDRESS IS REQUIRED)  
CITY  
STATE  
ZIP CODE  
DAYTIME PHONE NUMBER  
CREDIT CARD INFORMATION:  
CARD TYPE:  
VISA  
MASTER CARD  
CARD NUMBER  
EXP. MONTH  
YEAR  
NAME - EXACTLY AS IT APPEARS ON YOUR CREDIT CARD  
Part #  
Description  
Qty.  
Price Each  
$39.95  
TOTAL  
Remote Control  
MV1600RM  
Shipping and Handling  
Subtotal = ________ . ______  
Subtotal + Tax  
Up to $20.00  
20.01 to 30.00  
30.01 to 45.00  
45.01 to 70.00  
Over 70.01  
Add  
$5.00  
5.95  
6.50  
6.95  
7.95  
California Residents Add Sales Tax = ________ . ______  
Shipping and Handling (See Chart) = ________ . ______  
TOTAL = ________ . ______  
No C.O.D.’s  
On regular orders please allow 4-5 weeks for delivery. Please give a shipping address where this order  
may be delivered between the hours of 9 a.m. and 5 p.m. weekdays. If UPS is unable to deliver, your order will be  
returned and additional shipping charges will be required.  
19  
 
Order By Mail  
Replacement Parts for MovieVision®  
DESCRIPTION  
MODEL #  
PRICE  
1
4
2
5
8
0
3
6
9
7
10+  
DVD Remote Control  
MV1600RM  
$39.95 Ea.  
Warranty  
ONE (1) YEAR LIMITED WARRANTY  
Magnadyne Corporation or its authorized agents will within 1 year from the date of sale to you, repair, replace or  
refund the retail sales price of said product or any part thereof, at the option of the Magnadyne Corporation or its  
authorized agents, if said product or part is found defective in materials or workmanship, when properly connected  
and operating on the correct power requirements designated for the specific product. This warranty and  
Magnadyne Corporation or its authorized agents obligations hereunder do not apply where the product was;  
damaged while in the possession of the consumer, subjected to unreasonable or unintended use, not reasonably  
maintained, utilized in commercial or industrial operations, or serviced by anyone other than Magnadyne  
Corporation or its authorized agents, or where the warning seal on the product is broken or the power and/or plugs  
are detached from the unit. Magnadyne Corporation or any of its authorized agents will not assume any labor costs  
for the removal and re-installation of any product found to be defective, or the cost of transportation to Magnadyne  
Corporation or its authorized agents. Such cost are the sole responsibility of the purchaser.  
This warranty does not cover the cabinet appearance items or accessories used in connection with this product, or  
any damage to recording or recording tape, or any damage to the products resulting from improper installation,  
alteration, accident, misuse, abuse or acts of nature.  
MAGNADYNE CORPORATION OR ITS AUTHORIZED AGENTS SHALL NOT BE LIABLE TO ANYONE  
FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES OR CLAIMS EXCEPT THOSE ACCORDED BY LAW.  
NO EXPRESSED WARRANTY OR IMPLIED WARRANTY IS GIVEN EXCEPT THOSE SET FORTH HEREIN.  
NO IMPLIED WARRANTY SHALL EXTEND BEYOND 1 YEAR FROM THE DATE OF SALE.  
This warranty extends only to the original purchaser of the product and is not transferable.  
Some states do not allow limitations on how long an implied warranty lasts and some states do not allow the  
exclusion or limitation of incidental or consequential damages, so the above limitations or exclusion may not apply  
to you. This warranty gives you specific legal rights and you may have other rights that vary from state to state.  
Defective merchandise should be returned to the original point of purchase or secondly, to Magnadyne  
Corporation, 1111 W. Victoria Street, Compton CA 90220. Return Authorization must be obtained before sending,  
or merchandise may be refused.  
© Copyright 2006 Magnadyne Corporation  
MV850-UM Rev. A 3-9-06  
 

LaCie Computer Hardware 2big network User Manual
Land Pride Lawn Aerator CA25 User Manual
LG Electronics Cell Phone UX265G User Manual
Life Fitness GPS Receiver TR9100 User Manual
Lincoln Electric Welding System IM795 User Manual
Link electronic Music Mixer LEI 547 User Manual
LST Smoke Alarm GM 55000 137 User Manual
Makita Power Hammer HR4040C User Manual
Maytag Clothes Dryer W10557650B User Manual
Micro Innovations Microphone MM820NCM User Manual