Magnavox Portable DVD Player MPD 700 User Manual

User guide  
MPD-700  
Portable DVD Player  
R
Need help? Call us!  
Return  
Magnavox representatives are ready to help you with  
any questions about your new product. We can guide  
you through Connections, First-time Setup, or any of  
the Features.We want you to start enjoying your  
new product right away!  
your Warranty  
Registration Card  
within 10 days  
Y
CALL US BEFORE YOU CONSIDER  
RETURNING THE PRODUCT!  
1-800-705-2000  
or  
 
IMPORTANT SAFETY INSTRUCTIONS  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
12.  
Use only with the cart, stand,  
tripod, bracket, or table specified  
by the manufacturer or sold with the  
apparatus.When a cart is used, use cau-  
tion when moving the cart/apparatus  
combination to avoid injury from tip-over.  
4. Follow all instructions.  
13. Unplug this apparatus during lightning  
storms or when unused for long periods  
of time.  
5. Do not use this apparatus near  
water.  
6. Clean only with dry cloth.  
14. Refer all servicing to qualified service  
personnel. Servicing is required when the  
apparatus has been damaged in any way,  
such as power-supply cord or plug is dam-  
aged, liquid has been spilled or objects  
have fallen into the apparatus, the appara-  
tus has been exposed to rain or moisture,  
does not operate normally, or has been  
dropped.  
7. Do not block any ventilation open-  
ings. Install in accordance with the  
manufacturer´s instructions.  
8. Do not install near any heat sources  
such as radiators, heat registers, stoves, or  
other apparatus (including amplifiers) that  
produce heat.  
15.Battery usage CAUTION To  
prevent battery leakage which may result  
in bodily injury, property damage, or dam-  
age to the unit:  
9. Do not defeat the  
AC Polarized  
safety purpose of  
Plug  
the polarized or grounding-type plug.  
A polarized plug has two blades with one  
wider than the other. A grounding type  
plug has two blades and a third grounding  
prong.The wide blade or the third prong  
are provided for your safety. If the provid-  
ed plug does not fit into your outlet, con-  
sult an electrician for replacement of the  
obsolete outlet.  
G
G
G
Install all batteries correctly, + and - as  
marked on the unit.  
Do not mix batteries (old and new or  
carbon and alkaline, etc.).  
Remove batteries when the unit is not  
used for a long time.  
10. Protect the power cord from being  
walked on or pinched, particularly at plugs,  
convenience receptacles, and the point  
where they exit from the apparatus.  
EL 6475-E004: 02/8  
11.Only use attachments/accessories  
specified by the manufacturer.  
3
 
Safety Precautions  
Power Sources  
• Unplug the AC adaptor to cut the power if  
liquid or objects get inside the unit.  
• Take care not to drop the unit or subject it to  
strong shocks, which may cause malfunction.  
Note: When the player is in use for a long peri-  
od of time, the surface will be heated.  
This is normal.  
This unit operates on a supplied AC adaptor,  
car adaptor, or a rechargeable battery pack.  
• Make sure that the input voltage of the AC  
adaptor is in line with the local voltage.  
Otherwise, the AC adaptor and unit may be  
damaged.  
• Do not touch the AC adaptor with wet hands  
to prevent electric shock.  
Maintenance  
• Do not touch the lens !  
• When connecting with car power (cigarette  
lighter) adaptor, be sure the input voltage of  
the adaptor is identical with car voltage.  
• Unplug the AC adaptor from the outlet or  
remove the battery pack when the unit is not  
used for long periods of time.  
X
• If the player is brought directly from a cold  
to a warm location, or is placed in a very  
damp room, moisture may condense on the  
lens inside the player. If this occurs, the  
player will not operate normally. Leave the  
power on for about one hour with no disc in  
the disc tray until normal playback is  
possible.  
• Hold the plug to disconnect the AC adaptor.  
Do not pull the power cord.  
On Placement  
Avoid placing the unit in the following places.  
• Under direct sunlight or near a source of  
heat such as a heater.  
• Never leave the unit in a closed automobile,  
on a dashboard or an unstable shelf. Excess  
heat may deform the cabin or cause mal-  
function.  
• Where it is very dusty or sandy.  
• Wet or humid places, such as bathroom.  
• Near sources of strong magnetism, such as  
a television, speaker, or magnet.  
• Where there is a lot of movement or vibra-  
tion, such as on a car dashboard or an  
unstable shelf.  
• Avoid dust. Keep the disc tray closed after  
use. If there is dust on the lens, use a  
cleaning disc to clean.  
Handling discs  
• Do not attach paper or tape to the disc.  
• Keep the disc away from direct sunlight or  
heat sources.  
• Store the disc in a disc case after playback.  
• To clean, wipe the disc outwards from the  
center with a soft, lint-free clean cloth.  
• Where it is extremely hot or cold.  
• Where the unit is exposed to rain or water.  
For Safety  
• Do not disassemble the unit for laser rays  
are dangerous to eyes.  
Any service should be done by qualified  
service personnel.  
4
 
Contents  
Important Safety Instructions ..................................................................  
3
Safety Precautions ....................................................................................  
About MPD700 ............................................................................................  
4
6
Controls  
Main Unit ..........................................................................................................  
Remote Control....................................................................................................  
7
8
Power Supply  
Using the AC power adaptor ..................................................................................  
9
Using the battery pack .......................................................................................... 10  
Using the remote control........................................................................................ 12  
General disc information, About  
Basic Operations  
...................................................... 13  
Playback ............................................................................................................ 14  
Language & channel select, DVD Menu Play, Pause .................................................... 15  
Fast Searching, Slow Play ...................................................................................... 16  
Repeat .............................................................................................................. 17  
Shuffle, Random, Digest ........................................................................................ 18  
Bookmark, Zoom, Scanning CDs .............................................................................. 19  
Subtitles, Angles.................................................................................................. 20  
Using TIME SEARCH ............................................................................................ 21  
Programming DVD and CD tracks ............................................................................ 22  
MP3 Operation and Viewing JPEG files ................................................ 23  
OSD: On-screen Display features  
General OSD Operations, Title, Chapter .................................................................... 24  
Language, Subtitles .............................................................................................. 25  
Angle, TT Time, CH Time, Repeat ............................................................................ 26  
Time Display, Playing CDs ...................................................................................... 27  
Setup Menu functions  
General Setup Menu operation................................................................................ 28  
General Setup:TV Display ...................................................................................... 29  
SPDIF, Captions, Screen Saver, Audio Setup .............................................................. 30  
Speaker Setup, Dolby submenus.............................................................................. 31  
3D Processing, LCD, Password Setup........................................................................ 32  
Preference Page: Default, Parental .......................................................................... 33  
Connecting to additional equipment ...................................................... 34  
Technical Specifications .......................................................................... 37  
Troubleshooting ........................................................................................ 38  
Limited Warranty ...................................................................................... 40  
5
 
About MPD700  
High Defintion  
About DVDs  
The player adopts MPEG2 coding format and  
brings the horizontal resolution over 500 lines.  
Title, Chapter  
To help you skip and search content, the  
images or music of a DVD are divided into  
units. A title is made up of several  
chapters, and each chapter has a number  
for search (chapter numbering may not be  
available on all DVDs). Some DVDs may be  
structured with more than one title.  
Unique Functions  
Mutli-Angle and Multi-Language capability.  
Parental lock makes it easy to control the  
content of discs.  
Zoom  
You can enlarge pictures two or three or four  
times the original size.  
You can also shrink pictures by 25%-50%.  
CAUTION  
Use of controls or adjustments or per-  
formance of procedures other than  
herein may result in hazardous radia-  
tion exposure or other unsafe opera-  
tion.  
Multi - Functions  
Fast forward, fast reverse, slow play, frame  
play, repeat play and program play.  
Time Search  
It can search a specific part on a disc,  
especially good for watching action movies.  
The set complies with the FCC-Rules,  
Part 15 and with 21 CFR 1040.10.  
Operation is subject to the following  
two conditions:  
Audio Output  
1. This device may not cause harmful  
interference, and  
Analog audio output or optical digital audio  
output enables you to connect to an amplifier  
to enjoy high quality sound effects.  
2. This device must accept any inter-  
ference received, including interfe-  
rence that may cause undesired  
operation.  
Supplied accessories  
Make sure these items are in the package. If  
any item is missing, please contact your deal-  
er.  
Canada  
1 x Audio cable  
1 x Video cable  
English: This digital apparatus does not  
exceed the Class B limits for radio noise  
emissions from digital apparatus as set out  
in the Radio Interference Regulations of  
the Canadian Department of  
1 x Remote control  
1 x Car adaptor  
1 x AC power adaptor  
1 x Rechargeable battery pack  
1 x Warranty card  
1 x User guide  
Communications.  
6
 
Controls  
^
D V P 7 0 0  
P O R  
T
A
B
L
E
D
V
D
P
L
A
Y E R  
DC IN 9V  
LINE SELECT  
IN  
PHONES  
AUDIO  
VIDEO  
S-VIDEO  
VOLUME  
1
2
OPTICAL  
OUT  
OUT  
& * (£  
2
%
Y E R  
$
TITLE  
B
L
E
D
V
D
P
L
A
#
A
T
P O R  
D V P 7 0 0  
CHG  
@
!
0
3
4
ON POWER OFF  
9
5
6
7
8
Main Unit  
1
2
3
4
5
6
7
8
9
0
!
@
#
Display panel  
Speaker  
$
%
^
B
(PLAY)  
TITLE  
OPEN  
Lock - secures display panel  
close. Slide the display panel’s  
OPEN switch to unlock.  
CHG - battery charge indicator  
POWER - power indicator  
Infrared for remote control  
&
*
(
)
¡
£
VOLUME  
PHONES  
Direction buttons:  
OK  
3,  
4,  
2,  
1
AUDIO (OUT/IN) /OPTICAL OUT  
VIDEO (OUT/IN)  
;
(PAUSE)  
(STOP)  
LINE SELECT (OUT/IN)  
S-VIDEO  
*
9
RETURN  
MENU  
DC IN 9V  
ON POWER OFF  
FUNCTION & /§  
Type plate  
TIP :  
* Do not adjust the LINE SELECT switch at random. Keep the LINE SELECT switch in the OUT  
position when the POWER switch is set to ON.  
7
 
Remote Control  
OSD  
SETUP  
1
2
§
LANGUAGE AUDIO  
SUBTITLE  
ANGLE  
3
4
5
6
DIGEST  
MENU  
RESUME PLAY MODE  
ZOOM  
£
TITLE  
REPEAT  
A
B
-
¡
)
7
(
8
9
OK  
0
!
*
&
STOP  
PAUSE SLOW PLAY RETURN  
TIME SEARCH  
@
#
^
%
1
4
7
2
5
8
3
6
9
$
+10  
10/0  
RC-700  
1
2
OSD (On-Screen Display)  
LANGUAGE  
$
Number buttons  
TIME SEARCH  
. SLOW PLAY  
RETURN  
6
%
^
&
*
(
)
¡
£
3
4
5
6
7
8
9
0
!
@
#
AUDIO  
DIGEST  
RESUME  
MENU  
TITLE  
§
REPEAT  
A-B  
PLAY MODE  
ZOOM  
Direction buttons:  
3,  
4,  
2,  
1
2 / OK  
5
SUBTITLE  
9
(STOP)  
§
ANGLE  
SETUP  
Remote control sensor  
;
(PAUSE)  
8
 
Using the AC power adaptor  
D V P 7 0 0  
P O R  
T
A
B
L
E
D
V
D
P
L
A
Y E R  
DC IN 9V  
LINE SELECT  
IN  
PHONES  
AUDIO  
VIDEO  
S-VIDEO  
VOLUME  
OPTICAL  
OUT  
OUT  
Connect to power  
1
2
Connect the player's AC adaptor to the DC IN jack as shown.  
Plug the AC adaptor into a power outlet.  
TIP :  
Turn off the player before unplugging the AC adaptor so as to avoid damage to the player.  
The type plate is located on the bottom of the player.  
9
 
Using the Battery Pack  
Attach the battery pack properly following the Charging the Battery Pack  
explanation below. Make sure that the bat-  
tery pack is attached firmly to the player  
when using it. Otherwise, the battery may  
become detached and cause injury or  
We recommend you charge in room tempera-  
ture (68°F) conditions. Never dispose of in fire  
or water.  
1 Turn the player off.  
damage. Charge your battery before using.  
2 Attach the battery pack to the player.  
D
V
P
7
0
0
P
O
R
T
B
L
E
D
V
D
Attaching the Battery Pack  
Disconnect the AC adaptor and the power cord  
from the player, before you attach the battery  
pack.  
P
L
A
Y
E
R
DC IN 9V  
PHONES  
AUDIO  
VIDEO  
LINE SELECT  
IN  
S-VIDEO  
VOLUME  
OPTICAL  
OUT  
OUT  
1 Turn the player off.  
2 Turn the player upside down.  
3 Insert the battery pack's catches into the  
player's corresponding holes. Then, slide  
the battery pack until it is attached firmly.  
3 Connect the supplied AC adaptor and the  
power cord to the player. When charging  
starts, the CHG indicator illuminates red.  
When charging is completed, the CHG  
indicator turns off.  
O F F  
P O W E O R N  
TIP :  
When charging is in progress, do not discon-  
nect the AC adaptor and the power cord until  
the CHG indicator turns off.  
O F F  
P O W E O R N  
When the player is turned off, the charging  
time is approximately 3-4 hours (depending  
on environmental conditions).  
While a disc is playing, the charging time is  
approximately 6-8 hours.  
TIP :  
Remove the battery pack from the player  
when not in use.  
The attached battery pack may become  
warm when you are charging it or operat-  
ing the player. This is normal.  
Detaching the Battery Pack  
1 Turn the player off.  
2 Disconnect the AC adaptor and the power  
cord from the player.  
A battery icon  
is shown on the screen  
when battery power pack is running low.  
3 Turn the player upside down.  
4 Slide the battery pack's lock switch, then  
slide off the battery pack as shown.  
O F F  
P O W E O R N  
10  
 
Using the Battery Pack  
Power shutdown mode  
Playback time  
The power circuit in your player is designed  
with a power shutdown mode. This is  
activated only during battery power  
operation of the player when the battery  
becomes completely drained. When this  
happens:  
Times shown are approximate. Actual times  
depend on operating conditions.  
Player on, LCD display on  
Player on, LCD display off  
2.5 hr.  
4 hr.  
1 Adjust the POWER switch on the player to  
the OFF position.  
2 Connect your player to the AC power with  
the supplied power adaptor.  
3 Let the player stand idle for 30 seconds  
before switching on again to resume disc  
operation on AC power supply.  
Safety  
Do not use in high temperature or near  
heat sources.  
Never connect the positive and negative  
poles with metal.  
Do not open the battery, refer servicing only  
to qualified service personnel.  
BATTERY DISPOSAL CAUTION:  
Batteries contain chemical substances,  
so they should be disposed of properly.  
Dispose in accordance with  
applicable local, state/provincial or  
federal regulations.  
11  
 
Using the remote control  
1
Please remove the protective plastic tab (on top of the battery inside the battery  
compartment) if you have just unpacked the remote control and are using for the first time.  
2
To use the remote control, point it at the infrared sensor on the player’s front panel avoiding  
obstacles.  
TIP :  
To avoid interference with other electrical equipment, try using the remote control with a mini-  
mum distance of 7 inches from the sensor on the player.  
Inserting battery for the remote control  
1
Refer to the above diagram to open the battery compartment of the remote control.  
Insert 1 x lithium 3V battery, type CR2025, then close the compartment.  
Remove the battery if the remote control is not used for long periods of time.  
2
TIP :  
Generally, batteries last for about one year. Replace the batteries if the remote control does not  
work.  
Batteries contain chemical substances, so they should be disposed of properly.  
12  
 
General disc information, About  
Playable Discs  
PLAYING TIME  
TYPE  
DISC: LOGO  
CONTENT  
about 2hrs (single-side disc)  
about 4hrs (double-side disc)  
audio video  
(motion pictures)  
DVD  
about 80 mins (single-side disc)  
about 150 mins (double-side disc)  
about 74 mins  
about 20 mins  
audio  
audio  
CD  
about 600 mins  
MP3  
• The marks shown in the following chart are used in the manual.  
MARK  
INDICATION  
functions of DVD  
functions of CD  
DVD  
CD  
When Playing DVDs  
Many DVD discs have the following playback features: Title, Chapter, Audio, Subtitle, Angle,  
TT (Title) Time, CH (Chapter) Time, Repeat, and Time Display.  
About  
All the features described in this manual may not be available on every disc. If the feature is not  
available on the disc, you will be unable to operate the feature on the player, and the icon  
appears on the screen.  
This can also happen when you try to play a feature that is not immediately available. For  
example, some features are enabled only during disc playback, while others are possible  
only if playback is stopped.  
• Try stopping or starting playback, then try the feature again.  
13  
 
Basic Operations: Playback  
2
1
Y E R  
B
L
E
D
V
D
P
L
A
A
T
P O R  
D V P 7 0 0  
ON POWER OFF  
VOLUME  
OPEN  
Before you begin, turn on the power of your TV, stereo, and any other equipment connected to  
the DVD Player. Make sure the TV and the stereo (if applicable) are set to the correct channel.  
1
2
3
Slide the POWER switch to ON to turn on the player.  
Press OPEN to open the disc tray.  
Place a disc into the tray. If the DVD is recorded on only one side, place the disc in the tray  
with the label facing up and the shiny side facing down. Some DVDs are recorded on both  
sides. Make sure the label of the side you want to play is facing up.  
4
5
Press the tray door down to close the tray.  
To start playback, press  
B
(PLAY) /OK.  
- To play MP3 CDs, see page 23.  
6
7
Adjust the volume by using the VOLUME control.  
To stop playback, press  
9
(STOP) once. Pressing  
9
(STOP) twice stops resume.  
8
Slide the POWER switch to OFF to turn off the player.  
TIP :  
During operation of the player you may hear a mechanical noise. This is normal.  
14  
 
Language & channel select, DVD Menu Play,Pause  
Some DVDs have title menus and chapter  
DVD Language selection  
menus.  
Different discs differ in languages. You can  
1
Press  
Menu.  
B
(PLAY)/OK, to start playback  
select a language in a variety of ways:  
Using the OSD to enter the Preference  
Page --> Audio submenu to select. If a  
2
Press § or , to skip the next or  
previous title/chapter.  
language is included from this Audio  
submenu:  
English  
3
Press the number buttons to select another  
title/chapter.  
French  
Spanish  
Chinese  
Japanese  
Press TITLE/ MENU once or more to return  
to the respective menu / resume playback.  
is recorded on the disc, you can select  
sounds, subtitles or disc menu languages.  
If not, the language recorded on the disc is  
shown.  
Pause and Frame-by-frame  
Playback (for DVDs only)  
Press LANGUAGE  
shows in sequence  
, the screen  
1
During playback, press  
pause and the sound will be mute.  
When playing a DVD, press (PAUSE)  
;
(PAUSE). Play will  
2
;
Audio 1/2:AC3 5.1CH  
repeatedly to see the picture advance one  
frame at a time. The sound will remain  
mute.  
• Pressing  
;
(PAUSE) repeatedly during Audio  
CD, MP3, or JPEG playback will have no  
effect.  
Audio 2/2: AC3 5.1CH  
3
Press  
back.  
B
(PLAY)/OK to resume normal play-  
Channel select (for DVDs & CDs)  
You may select the right channel or left  
channel or stereo from a multi-channel disc.  
Press AUDIO  
sequence:  
, the screen shows in  
Mono Left  
Mono Right  
Mix-Mono  
Stereo  
15  
 
Fast Searching  
Slow Play  
Fast Searching  
SLOW PLAY (DVDs only)  
You can enjoy scenes in slow motion.  
1
Press 6 to play fast forward. Each time  
you press the button repeatedly, the screen  
shows in sequence:  
SLOW PLAY  
.
1
2
3
4
5
6
22  
22  
2X  
4X  
1
Press SLOW PLAY repeatedly to select a  
slow play option.  
The screen shows in sequence.  
22 8X  
22 16X  
22  
2
32X  
|2 1/16  
|2 1/4 |2 1/8  
|2 1/2  
2
Press 5 to fast reverse the disc. Each time  
you press the button repeatedly, the screen  
shows in sequence:  
1| 1/2  
2
1| 1/8 1| 1/4  
1|1/16  
1
2
3
4
5
6
11  
11  
2X  
4X  
2
Press  
playback.  
B
(PLAY)/OK to resume normal  
11 8X  
11 16X  
11  
2
32X  
3
Press  
playback.  
B
(PLAY)/OK to resume normal  
16  
 
Repeat play options  
Repeating selective segments  
You may press A-B to play selective  
segments repeatedly.  
DVD  
REPEAT  
CD  
Repeat Play  
1
2
Press  
B
(PLAY)/OK to start disc playback.  
When the disc reaches the point where you  
want repeated playback to begin, press  
A-B.  
This button can be used to repeat a title,  
chapter, track, disc, or a specific portion of a  
disc.  
The screen shows:  
A
DVD and CD repeat options  
You may repeat a title or chapter.  
1
2
3
To repeat a chapter, press REPEAT.  
The screen will show  
3 When the disc reaches the point where  
you want to end the segment, press A-B  
again. The segment will begin playing  
repeatedly.  
• On a DVD, make sure the entire A-B  
segment is within a single Chapter. On a  
Video CD or Audio CD, the A-B segment  
should be within a single track.  
Chapter  
To repeat a title, press REPEAT again.  
The screen will show  
The screen shows:  
Title  
AB  
Repeat all:  
Press REPEAT several times.  
The screen shows “  
ALL”.  
To cancel and resume normal playback  
Press A-B again until "  
disappears.  
A B “  
To cancel repeat playback  
• Press REPEAT again until “  
ALL”  
disappears.  
17  
 
Shuffle, Random  
Digest  
The screen shows:  
Shuffle or Random Play  
CD  
DVD  
`
Select Digest Type :  
Both the Shuffle and Random options allow you  
to play the contents of your disc in a different  
order.  
Title Digest  
Chapter Digest  
Title Interval  
In disc stop position, press PLAY MODE  
once or more to select shuffle or random play  
mode.  
1
Chapter Interval  
PLAY MODE  
Use the 4 or 3 buttons to select "Chapter  
Digest" and press 2 (PLAY)/OK to confirm.  
The player begins to look through the chapters,  
and shows the starting picture of each  
chapter on the screen.  
The screen shows Shuffle or Random:  
Press 2 (PLAY)/OK to start shuffle or random  
play.  
2
01  
04  
03  
06  
02  
05  
To cancel shuffle or random play  
• Press 9 (STOP).  
Type : Chapter(Title 01)  
Select(01-26): __  
Exit Menu Next 6  
CD  
DVD  
Digest Play  
`
§
Use the direction buttons to select NEXT  
2
3
Use this function to scan through the title/  
chapter content of the track or disc.  
on the screen, and press 2 (PLAY)/OK to go  
to the next page.  
DIGEST  
To cancel the digest feature, use the  
direction buttons to select Exit on the  
screen and press 2 (PLAY)/OK to confirm.  
Example : Selecting Chapter Digest  
TIP :  
During playback press DIGEST .  
1
If you have stored bookmarks on a DVD disc,  
there will be one more digest option:  
Bookmark Digest.  
18  
 
Bookmark  
Zoom, Scanning CDs  
DVD  
DVD  
Bookmark  
Zoom Play  
This function can be used to watch a motion or  
still picture. The player has 3 zoom in 2X, 3X,  
The bookmark feature lets you mark a point on  
the disc that you can go to quickly. You can  
store up to 12 bookmarks per disc. When you  
turn the player off or remove the disc, book-  
marks are cleared.  
4X and 3 zoom out views 1/2, 1/3, and 1/4  
.
Press ZOOM during playback.  
The screen shows:  
Your picture is enlarged twice the original size.  
1
Creating a Bookmark  
1 During playback, press RESUME on the  
2X  
remote.  
=The Bookmark Menu appears.  
2 When you reach the scene you want to  
mark, press 2 (PLAY)/OK.  
3 If you want to mark another point, press  
2 the button to move the cursor to next  
spot. When you reach another scene you  
want to mark, press 2 (PLAY)/OK.  
=press RESUME to close the Bookmark  
Menu and resume to normal playback.  
Press ZOOM repeatedly to further enlarge  
by 3 times (3X) or 4 times (4X).  
2
3 For zoom out views ony press 1, 3, 4, 2,  
to move the enlarged picture.  
4 To cancel zooming, press repeatedly  
Using a Bookmark  
ZOOM until the picture is in normal size.  
1 During playback, press RESUME.  
=The Bookmark Menu appears.  
2 Use the direction buttons to highlight the  
bookmarked scene you want to play.  
3 Press 2 (PLAY)/OK to go to the place you  
marked.  
Scanning CDs  
In stop mode, press DIGEST  
The screen shows:  
1
Scan  
=
The player scans first ten seconds of each  
track.  
To cancel Scanning and playback :  
press 9 (STOP).  
STOP  
19  
 
Subtitles  
Angles  
Selecting DVD Subtitles  
Angles  
Some discs have images with a number of  
different viewing angles. For example, when you  
watch a running train, you may watch it from  
the front, the left window or the right window  
without stopping it.  
This operation works only with discs on which  
multiple subtitle language are recorded.  
1
Press SUBTITLE  
desired language is selected.  
The screen shows :  
repeatedly until the  
Example:  
If DVD has four viewing angle options.  
E
1
Press  
to select ANGLE1.  
Subtitle 01/03:ENGLISH  
SCREEN :  
1/4  
To cancel subtitle :  
• Press SUBTITLE  
repeatedly until the  
screen shows "Subtitle Off"  
2
3
Press  
repeatedly to select other  
angles, the screen shows respectively:  
TIP :  
2/4 (select ANGLE2)  
3/4 (select ANGLE3)  
• For some discs subtitles cannot be  
removed.  
• Different discs differ in the language of  
subtitles.  
4/4 (select ANGLE4)  
To resume normal playback, press  
.
20  
 
Using TIME SEARCH  
Selecting to play your DVD from a  
specific elapsed playback time:  
With this button, you can toggle between 3  
TIME SEARCH options. You may directly enter a  
time, title or chapter number to fast search on a  
disc, and play from that point.  
1
Press TIME SEARCH repeatedly until the  
screen shows :  
Track : --/xx,  
where xx denotes the total number  
of tracks on your CD.  
CD playback will start from the selected  
track number.  
How to search a DVD title or a  
chapter  
For example: Searching to chapter 2 in title 6.  
=
1
Press TIME SEARCH.  
The screen shows:  
Title 03/30 Chapter 01/04  
2
Press a direction button and move the  
cursor to highlight the title number.  
The screen shows:  
Title 03/30 Chapter 01/04  
3
Press button 6 to select title 6.  
The screen shows:  
Title 06/30 Chapter 01/04  
4
Repeat the steps above, select chapter 2 in  
title 6.  
21  
 
Programming DVD and CD tracks  
To playback a DVD/CD program :  
To use the program playback feature, you must  
enter the order in which you want the titles (and  
chapters) on the DVD or the tracks on the CD to  
play by creating a program. Program display  
options may vary according to your DVD and  
show TT-- (Title) as well as CH-- (Chapter).  
You can play your program by highlighting  
Start and pressing (PLAY)/OK.  
2
TIP :  
If the chapters or tracks you want to program  
are more than 10, you can highlight NEXT and  
press (PLAY)/OK to go to the next page.  
2
DVDs  
To cancel a program  
• Press 9 (STOP) until Program :Off  
appears.  
1
During playback press PLAY MODE once or  
more until the screen shows the program  
box. For example :  
Program: Chapter (01-35)  
CDs  
01  
02  
03  
04  
05  
06  
07  
08  
09 --  
10  
--  
--  
--  
--  
--  
--  
--  
--  
1
2
Press PLAY MODE until the screen shows:  
Program: Track (01-20)  
01  
02  
03  
04  
05  
06  
07  
08  
09 --  
10  
--  
--  
--  
--  
--  
--  
--  
--  
--  
NEXT  
Exit  
2
Use the number buttons on the remote to  
enter the chapter you want to play first.  
The chapter number you entered appears in  
the box. The screen shows:  
--  
NEXT  
Exit  
=
Use the number buttons on the remote to  
enter the track number you want in the box.  
The screen shows:  
Program: Chapter (01-35)  
01 08  
06  
07  
08  
09 --  
10  
--  
--  
--  
02  
03  
04  
05  
--  
--  
--  
--  
Program: Track (01-20)  
01 08  
06  
07  
08  
09 --  
10  
--  
--  
--  
02  
03  
04  
05  
--  
--  
--  
--  
--  
NEXT  
Exit  
Start  
--  
=
The cursor jumps to the next spot in the  
program list section.  
NEXT  
Exit  
Start  
3
Make sure the box is highlighted and enter  
your next track.  
=The cursor jumps to the next spot in the  
program list section.  
4
Continue adding chapters until your  
program is complete.  
3
Make sure the box is highlighted and enter  
your next track.  
22  
 
Playing MP3 discs  
Viewing JPEG files  
Programming MP3 tracks  
MP3  
Select Tracks with Menu  
1
In stop mode, press PLAY MODE once or  
more to bring up the filelist.  
1
Insert a disc, the player reads the disc. The  
TV screen displays main menu.  
2
Use the direction button 4 to select the  
songs which you want to be programmed.  
Press RESUME to confirm, and “Add to  
Playlist” will be displayed.  
00:00  
00:00  
001/012  
Folder  
\
3
When your program is complete, press  
PLAY MODE again, “Playlist” will be  
displayed. Press 2 (PLAY)/OK to start  
playback.  
3
CD01  
CD02  
CD03  
CD04  
CD05  
CD06  
To cancel your program  
4
• Your program is to start playback  
memorised by the player, and is  
deleted/cancelled when you remove your  
MP3 disc from the player.  
2
Press 4 to select a music folder. Press 2  
(PLAY)/OK to confirm selection. Example:  
Select CD02 :  
Other MP3 functions  
00:00  
00:00  
During playback MP3 discs, the unit features  
mute, volume control, repeat play and etc.  
Operations are the same as CD.  
001/012  
Folder  
\
3
--  
wave-11  
wave-12  
wave-13  
wave-14  
wave-15  
Viewing JPEG files  
You can also view JPEG still photos on this  
player.  
4
3
4
Use the direction buttons to select a track.  
Press 2 (PLAY)/OK to start playback.  
In stop mode, select the folder icon on the  
left side, then press 2 (PLAY)/OK to  
return to the main menu.  
1
Insert a disc, the player reads the disc.  
Press 4 to select a picture folder. Press 2  
(PLAY)/OK to confirm selection.  
Use the direction buttons to select a track.  
Press 2 (PLAY)/OK to view a photo.  
If your folder contains more than one  
photo, the player will then automatically  
enter the slide show mode. Using the full  
display screen, this shows the rest of the  
JPEG files, one-by-one, located in the  
selected current folder.  
2
3
5
Press  
§
or  
to play a previous or next track.  
=
23  
 
General OSD Operations OSD: Title, Chapter  
OSD operation (for DVDs and  
CDs)  
The On-Screen Display (OSD) contains many  
playback features.  
• To see the OSD Menu, press the OSD  
button on the remote control while a disc is  
playing. During OSD Menu operation, your  
picture zooms out.  
Selecting Title  
Some discs contain more than one title. Each  
title is divided into chapters. To select a title:  
1
2
3
4
While the disc is playing, press OSD on  
the remote to bring up the Menu.  
If "Title" on the Menu isn't highlighted, use  
the direction buttons  
3
or  
4
to highlight it.  
Press B (PLAY)/OK. The box to the right is  
will be highlighted.  
• Use the direction buttons  
3
or  
4
to move  
through the different playback features in  
the OSD Menu. When a playback feature is  
Use the number buttons on the remote  
control to enter a title number that you  
want to play.  
highlighted, press  
B
(PLAY)/OK and the box  
to the right will be highlighted.  
• Use the direction buttons  
through the choices.  
3
or  
4
to move  
TIP :  
• To return to the normal playback screen,  
press the OSD button.  
Some discs only have one title.  
Selecting a Chapter  
You can skip to a specific chapter by using  
the Chapter feature in the Menu.  
1
2
3
4
While the disc is playing, press OSD on the  
remote to bring up the Menu.  
Press the direction buttons  
3
or  
4
to high-  
light "Chapter".  
Press  
B
(PLAY)/OK, the box to the right is  
will be highlighted.  
Use the number buttons on the remote to  
enter a chapter number that you want to  
play.  
TIP :  
The Chapter feature won't work if the disc  
isn't formatted with separate chapters. You  
can also advance to the next chapter by  
pressing  
§
on the remote control and go to  
the preceding chapter by pressing  
.  
24  
 
OSD: Language  
Subtitles  
Changing the Audio Language  
If the disc was created with different  
language tracks (recorded in different  
languages), you can use the OSD Menu to  
temporarily change the DVD player's Audio  
Language setting.  
Changing the Subtitle language  
If the disc was created with different  
subtitles, you can use the OSD Menu to  
change the Subtitle language.  
1
While the disc is playing, press OSD on the  
remote to bring up the Menu.  
1
2
3
4
While the disc is playing, press OSD on the  
remote control to bring up the Menu.  
2
3
Press the  
Press the  
3
or  
4
to highlight "Subtitle".  
B
(PLAY)/OK, the subtitle  
Press the direction buttons  
highlight "Audio".  
3
or  
4
to  
languages appears.  
Press or to move through the subtitle  
languages that are available on the disc.  
Press (PLAY)/OK when the subtitle  
4
3
4
Press  
B
(PLAY)/OK, the audio languages  
appear on the screen.  
B
language you want to use is highlighted.  
Press the or to move through the audio  
languages that are available on the disc. Press  
the (PLAY)/OK when the audio language  
3
4
B
TIP :  
you want to use is highlighted.  
Changing the subtitle language with OSD  
will only affect the disc currently being  
played. When the disc is removed or the  
player is turned off, the subtitle language  
will revert to the language setting specified  
through the DVD player main menu.  
The subtitle language can also be changed  
TIP :  
T
he Language feature only works if the disc was  
created with multiple audio tracks. When you  
choose an audio language from the OSD Menu  
you only override the audio language setting in  
the DVD player's main menu temporarily.  
,
by using the SUBTITLE  
button (see  
The audio language can also be changed  
through the DVD player menu.  
page 20, Selecting DVD Subtitles.)  
25  
 
OSD: Angle,TT Time, CH Time, Repeat  
Changing the Camera Angle  
Some DVDs contain scenes recorded from  
different angles. The camera angle will not  
change if the DVD does not contain  
sequences recorded from different camera  
angles.  
Repeat  
The default mode for the repeat feature is  
Off. There are three repeat options:  
Chapter - repeats the chapter that is  
playing  
Title - repeats the title that is playing  
1
While the disc is playing, press OSD on the  
remote control to bring up the Menu.  
Off  
All - repeats the disc that is playing  
2
3
Press  
Press  
3
B
or  
4
to highlight "Angle".  
1 During playback, press OSD on the remote  
(PLAY)/OK, the box to the right is  
control to bring up the Menu.  
now highlighted.  
Use the number buttons to enter an angle  
number that you want to play.  
2
3
Press  
Press  
3
B
or  
4
to highlight "Repeat"  
4
(PLAY)/OK, the repeat options  
appears.  
Press  
options. Press  
4
3
or  
4
to move through the repeat  
(PLAY)/OK when the  
B
repeat option you want to use is  
highlighted.  
To cancel repeat :  
Setting TT (Title) Time  
You can skip to a specific title time by using  
the TT (Title) Time feature in the Display.  
5
• Go to the Repeat feature in the Menu and  
select Off.  
1
While the disc is playing, press OSD on the  
remote control to bring up the Menu.  
2
3
Press  
Press  
now highlighted.  
3
B
or  
4
to highlight "TT (Title) Time".  
(PLAY)/OK, the box to the right is  
4
Use the number buttons to enter a title time  
that you want to play.  
Setting CH (Chapter) Time  
You can skip to a specific chapter time by  
using the CH (Chapter) Time feature in the  
Menu.  
1
2
3
4
While the disc is playing, press OSD on  
the remote control to bring up the Menu.  
Press  
Time".  
Press  
3
or  
4
to highlight "CH (Chapter)  
B
(PLAY)/OK, the box to the right is  
now highlighted.  
Use the number buttons to enter a chapter  
time that you want to play.  
26  
 
OSD: Time Display  
Playing CDs  
CD discs have the following playback  
features: Track, Disc Time, Track Time,  
Repeat, and Time Display.  
Changing the Time Disp(Display)  
You can change the time displayed on the  
screen: Title Elapsed, Title Remain, Chapter  
Elapsed and Chapter Remaining.  
1
While the disc is playing, press OSD on the  
remote control to bring up the Menu.  
Selecting a specific track  
1
While the disc is playing, press OSD on  
2
3
Press  
Press  
3
B
or  
4
to highlight "Time Disp".  
the remote control to bring up the Menu.  
(PLAY)/OK, the time options  
2
3
Press  
Press  
3
or  
4
to highlight "Track".  
appears.  
Press  
options. Press  
option you want to use is highlighted.  
B
(PLAY)/OK, the box to the right is  
4
3
or  
4
to move through the time  
(PLAY)/OK when the  
now highlighted.  
B
4
Use the number buttons to enter a track  
number that you want to play.  
Repeat  
Changing the Displayed Time  
You can changing the time displayed on the  
screen : Single (Track) Elapsed Time,  
Single (Track) Remain Time, Total (Disc)  
Elapsed Time, and Total (Disc) Remain  
Time.  
The default mode for the repeat feature is  
Off. There are two repeat options for CDs:  
• All - repeats the disc that is playing  
• Track - repeats the current track that is  
playing  
1
While the disc is playing, press OSD on the  
remote control to bring up the Menu.  
1
While the disc is playing, press OSD on the  
remote control to bring up the Menu.  
2
3
Press  
Press  
appears.  
Press  
options. Press  
3
B
or  
4
to highlight "Repeat".  
2
3
Press  
Press  
appears.  
Press  
3
B
or  
4
to highlight "Time Disp".  
(PLAY)/OK, the repeat options  
(PLAY)/OK, the time options  
4
3
or  
4
to move through the repeat  
(PLAY)/OK when the  
4
3
or  
4
to move through the time  
B
options. Press B (PLAY)/OK when the  
repeat option you want to use is  
highlighted.  
option you want to use is highlighted.  
27  
 
General Setup Menu operations  
The screen shows:  
DVD  
Menu Setting  
Functions may very according to the Disc  
and your additional equipment such as  
connecting with speaker sytstem. Set the  
following functions for the player to obtain  
the best viewing status.  
-- Audio Setup Page --  
Speaker Setup  
Dolby Digital Setup  
Equalizer  
3D Processing  
Main Page  
Press SETUP to enter the Setup Menu.  
1
SETUP  
Go To Speaker Setup Page  
Press  
4
or  
3
to highlight "Dolby Digital  
The Setup Menu appears on the screen, with  
icons across the top of the screen, illustrat-  
ing General Setup, Audio Setup, LCD Setup  
Page, Preference Setup, Password Setup, and  
Exit Setup.  
Setup", and press (PLAY)/OK to enter  
"Dolby Digital Setup" page.  
2
The screen shows the submenu:  
The screen shows:  
-- Dolby Digital Setup --  
Dual Mono  
D.R.C.  
STR Stereo  
L - Mono  
-- Setup Menu -- Main Page --  
General Setup  
R - Mono  
Audio Setup  
Mix - Mono  
Audio Setup  
LCD Setup Page  
Preference Setup  
Password Setup  
Exit Setup  
Set Stereo Mode  
Press or  
4
to select "L - Mono".  
2
The screen shows:  
Go To General Setup Page  
2
Press  
4
or  
3
to select your option and  
press (PLAY)/OK to confirm.  
2
-- Dolby Digital Setup --  
Dual Mono  
D.R.C.  
L
Stereo  
Example: Press  
4
to highlight "Audio  
L - Mono  
R - Mono  
Mix - Mono  
Setup", press (PLAY)/OK to enter  
"Audio Setup Page"  
2
Audio Setup  
Set Left Mono Mode  
28  
 
General Setup: TV Display  
TV Display Page  
Press (PLAY)/OK to confirm your  
2
selection.  
There are 3 TV display type options which you  
can select from the TV Display submenu on  
the General Setup Page.  
3
To exit the Setup Menu, press to high-  
light "Exit Setup" and press (PLAY)/OK to  
exit Setup Menu completely.  
4
2
-- General Setup Page --  
TV Display  
Wide Normal/PS  
SPDIF Output RAW Normal/LB  
Captions  
On  
On  
Wide  
Screen Saver  
Main Page  
Set TV Display Mode  
TV display type options as follows:  
Normal/PS (Pan & Scan)  
This is selected when the player is connected  
to a standard screen TV. Widescreen images  
are shown on the screen, but with some parts  
cut automatically.  
29  
 
SPDIF, Captions, Screen Saver, Audio Setup  
Normal/LB (letterbox)  
Captions (closed Captioning)  
Screen captions are available only on DVDs and  
TVs encoded with the caption function. For  
DVDs which have captions, you will need to  
connect your player to your TV in order to select  
and enable the caption on/off option.  
On  
This is selected when the player is connected  
to a standard screen TV. Widescreen images  
are shown on the screen, with a black frame  
on the top and bottom.  
The closed caption is shown.  
Off  
The closed caption is turned off.  
Wide  
Screen Saver  
This is selected when the player is connected  
to a widescreen TV.  
When the screen saver is on, the screen saver  
image appears when the player stops or the  
image is frozen for a few minutes.  
On: Enables the screen saver.  
Off: Disables the screen saver.  
Audio Setup  
The submenu structure is:  
TIP :  
You can also press the FUNCTION button on  
the player to change the display mode  
between "4:3" and "16:9".  
-- Audio Setup Page --  
SPDIF Output  
• SPDIF OFF: No signal is output from the  
digital port.  
Speaker Setup  
Dolby Digital Setup  
Equalizer  
• SPDIF/RAW: Select this when the DVD player  
is connected with a digital amplifier through  
digital port. When a Dolby Digital disc or  
MPEG disc is played, the digital output will be  
optional. The power amplifier to be  
connected must have Dolby Digital and MPEG  
decoding.  
3D Processing  
Main Page  
Go To Speaker Setup Page  
• SPDIF/PCM: Select this when the DVD player  
is connected with a 2-channel digital stereo  
amplifier. When a Dolby Digital or MPEG disc  
is played, the digital port will output in  
PCM 2-channel format.  
30  
 
Speaker Setup, Dolby submenus  
D.R.C  
Speaker Setup Page  
The Dynamic Range Compression (D.R.C.) is  
useful for nightime viewing. DRC reduces the  
highs and lows by compressing and levelling  
out the volume range during disc playback.  
The submenu structure is:  
-- Speaker Setup Page -  
Downmix  
STR  
Lt/Rt  
Stereo  
Audio Setup  
-- Dolby Digital Setup --  
FULL  
3/4  
Dual Mono STR  
D.R.C.  
Audio Setup  
1/2  
Set Downmix Mode  
1/4  
Lt/Rt  
OFF  
The output signal will be incorported to left  
and right channel.  
SetD.R.C.off
Stereo  
The output signal will be incorported to  
stereo.  
Equalizer Page  
You can select graphic equalizer options  
according to the genre of the music being  
played.  
Dolby Digital Setup Page  
The submenu structure is:  
-- Dolby Digital Page --  
-- Equalizer Page --  
Dual Mono  
D.R.C.  
L
Stereo  
EQ Type  
None  
None  
Rock  
Pop  
L-Mono  
R-Mono  
Mix-Mono  
Audio Setup  
Live  
Dance  
Techno  
Classic  
Soft  
Set Left Mono Mode  
Select Equalizer Type  
Dual Mono  
The setting structure is:  
Press 3 or 4 to select your EQ option.  
Confirm by pressing (PLAY)/OK.  
This is the output mode of the L and R  
signals of the set audio output. If it is set to  
"Mix-Mono", the function only works when  
the DVD being played is 5.1-channel.  
2
31  
 
3D Processing, LCD, Password Setup  
Brightness  
3D Processing Page  
You can use the  
2
or  
1
1
direction buttons to  
direction buttons to  
The submenu structure is:  
adjust the brightness.  
Color  
You can use the  
adjust the color.  
2
or  
-- 3D Processing Page -  
V SURR Off On  
Reverb Mode Off  
Audio Setup  
Off  
Password Setup Page  
The submenu structure is:  
Set Virtual Surround  
-- Password Setup Page  
Password Mode Off Normal  
Password  
V SURR (Virtual Surround)  
You can select to turn the Virtual Surround  
sound on and off.  
Main Page  
Reverb Mode  
Go To Password Setup Page  
Reverb Mode allows you to optimise sound  
effects. Select from 8 options, or none (off): Off,  
Concert, Living Room, Hall, Bathroom,  
Cave, Arena or Church  
Password Mode  
On: password mode activated. "PARENTAL"  
is dimmed and cannot be selected.  
Off: The password is swiched off,  
"PARENTAL" can be selected.  
LCD Setup Page  
The submenu structure is:  
Changing your Password  
Select the Password submenu to change the  
code. The screen shows:  
-- LCD Setup Page --  
Picture Mode Full  
Normal  
Full  
Brightness  
Color  
08  
08  
Old Password  
New Password  
Confirm PWD  
Main Page  
Picture Mode  
OK  
Follow the screen instructions to enter your  
password.  
Picture Mode  
Normal  
The picture is in normal size.  
Full  
The picture will fit on full screen.  
TIP :  
The default password is 99999  
32  
 
Preference Page: Default , Parental  
The submenu structure is:  
How to set your Parental Lock  
Password  
1
When in the disc stop position, press  
SETUP on the remote control to enter the  
Setup Menu - Main Page”.  
-- Preference Page --  
ENG  
ENG  
ENG  
USA  
08  
English  
2
3
Press 4 to highlight Preference Setup.  
Audio  
French  
Press the (PLAY)/OK to confirm and enter  
Subtitle  
2
Spanish  
Chinese  
Japanese  
Disc Menu  
Country Region  
Parental  
the Preference Page.  
Press 4 to highlight Parental.  
4
5
Use the  
or  
to select your  
2 and the 3  
4
Default  
DVD rating. Press (PLAY)/OK to confirm.  
2
Main Page  
- When a disc that is rated higher than the  
parental lock set rating is played, the security  
password will be required.  
Preferred Audio Language  
TIP :  
TIP :  
- For security, when the Password is set On the  
parental lock function cannot be selected. You  
will need to switch your Password Off first  
(see page 32, Password)  
- Some DVDs are not encoded with a rating,  
although the movie rating is printed on the  
disc case/packaging. The parental lock will  
not block viewing of such discs.  
- Magnavox cannot guarantee the availability  
of parental control with all discs, and there-  
fore denies any liabilty associated with  
unintended viewing.  
The "Preference Setup" only can be select-  
ed when the player is in stop mode.  
Default >> Reset  
Each function setting returns to the default  
setting if you select this option.  
Parental  
With the parental lock function, you may  
select an age control rating for playback of  
discs on the player. For example, you can  
select and lock onto "PG", whereby you can-  
not play discs rated higher than PG. The DVD  
ratings available on this player are:  
1 KID SAF  
2 G  
3 PG  
4 PG 13  
5 PGR  
6 R  
7 NC17  
8 ADULT  
33  
 
Connecting to additional equipment  
1
SPEAKERS  
You can connect the player to a TV or an amplifier to enjoy DVDs or karaoke.  
Connecting a TV and a Stereo/Amplifier (see  
1
)
1
Connect one end of the yellow video cable to the VIDEO IN jack of the TV. Connect the other  
end to the VIDEO OUT jack on the player.  
2
Connect the red audio cable to the AUDIO IN R jack on the speaker. Connect the white  
audio cable to the AUDIO IN L jack on the speaker. Connect the other end to the AUDIO  
(OPTICAL OUT) jack on the player.  
3
Connect the AC adaptor into the DC IN 9V on the player. Connect the other end of the AC  
adaptor into a power outlet.  
Using Headphones  
• Insert headphones into the PHONES jack of the player.  
• Turn off the power when inserting or disconnecting headphones.  
Take care when using headphones  
Hearing safety: listen at a moderate volume. Using headphones at high volume can  
impair your hearing.  
Traffic safety: do not use while driving or cycling as you may cause an accident.  
34  
 
Connecting to additional equipment  
Connecting to a TV Only  
TV has only a single Antenna In or RF-In jack  
Back of TV  
(example only)  
Back of RF Modulator  
(example only)  
ANT IN  
TO TV  
AUDIO IN  
VIDEO  
IN  
R
L
CH3 CH4  
ANTENNA IN  
RF IN  
Antenna or Cable TV Signal  
DC IN 9V  
AUDIO  
LINE SELECT  
PHONES  
VIDEO  
S-VIDEO  
VOLUME  
OPTICAL  
OUT  
OUT  
IN  
Before you begin, make sure you have an RF modulator and extra RF coaxial cables.  
These are not supplied with the player, but are available from Magnavox or most  
consumer electronics retailers.  
1 Connect the supplied video cable (which has yellow markings) to the player’s  
yellow VIDEO (VIDEO OUT) jack. Connect the other end of the cable to the  
VIDEO IN jack on the RF modulator. The VIDEO IN jack on the RF modulator is usually  
yellow and might be labelled VIDEO, CVBS, COMPOSITE, or BASEBAND.  
2 Connect the supplied audio cable (which has white markings) to the player's  
AUDIO (OPTICAL OUT) jack.  
Connect the other end of the audio cable to the AUDIO IN jacks on the RF modulator.  
Audio jacks on the RF modulator usually are red (right) and white (left). Match the cable colors  
to the jack colors.  
3 You probably already have an antenna or Cable TV signal connected to the ANTENNA IN jack  
on your TV.  
Disconnect it now from the TV. Reconnect the antenna or Cable TV signal to the  
ANTENNA IN jack on your RF modulator.  
35  
 
Connecting to additional equipment  
4 Connect an RF coaxial cable (not supplied) to the RF OUT, ANTENNA OUT, or TO TV  
jack on the RF modulator. The RF OUT jack may be labelled differently among different  
brands. Refer to the instructions provided with your RF modulator.  
Connect the other end of the same RF coaxial cable to the  
ANTENNA IN or RF IN jack on your TV.  
5 Your RF modulator should have a Channel 3/4 switch.The setting of this switch determines the  
TV channel on which you will watch materials playing on the DVD Player.  
Set the RF modulator’s Channel 3/4 switch to either 3 or 4, whichever TV channel is  
least used in your area. If your RF modulator has a modulator/antenna switch, set it  
accordingly. Refer to the instructions that came with the RF modulator.  
Turn on your TV and choose channel 3 or 4. Choose the same channel to which you set  
the RF modulator’s Channel 3/4 switch.  
6 Connect the player’s AC adaptor to a power outlet and turn on the DVD player's  
POWER switch to ON. If no disc is in the player, you should see the player's screen  
saver on the TV screen.  
36  
 
Technical Specifications  
wavelength 650mm  
Laser  
NTSC  
Video system  
Frequency response  
20Hz ~ 20KHz 1dB  
> 95dB  
Signal/noise ratio  
Audio distortion + noise  
Channel separation  
Dynamic range  
< -80(1KHz)  
> 85dB  
> 85dB  
Audio out  
Output level: 2V 10%  
(analog audio)  
Load impedance: 10K  
Output  
Audio out  
(analog audio)  
Output level: 1.6Vp - p  
Video out  
Output level: 1Vp - p 20%  
Load impedance: 75, imbalance, negative polarity  
Power supply  
DC 9V 2A  
Operating  
temperature  
41 ~ 95°F  
range  
Power Consumption  
Dimensions  
< 20W  
7.5 x 5.6 x 1.15 (inches)  
1.88 (lb)  
Weight  
Magnavox reserves the right to make design and specification changes for product  
improvement without prior notice.  
This product incorporates copyright protection technology that is protected by method claims  
of certain U.S. patents and other intellectual property rights owned by Macrovision  
Corporation and other rights owners. Use of this copyright protection technology must be  
authorized by Macrovision Corporation, and is intended for home and other limited viewing  
uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or  
disassembly is prohibited.  
37  
 
Troubleshooting  
If a fault occurs, first check the points listed  
below before taking the set for repair.  
If you are unable to remedy a problem by  
following these hints, consult your dealer or  
service center.  
No picture  
• Check if the player is connected securely.  
• Make sure you operate the TV correctly.  
• Make sure you set the color system  
correctly.  
Bad sound quality  
• Make sure the audio output mode is set  
correctly.  
• Make sure you did not connect any cables  
from the DVD player to a Stereo’s  
“PHONO IN” jack.  
WARNING:  
Do not open the set as there is a risk of  
electric shock. Under no circumstances  
should you try to repair the set yourself,  
as this will invalidate the warranty.  
• Make sure you did not connect the play-  
er’s COAXIAL digital audio out jack to an  
analog jack on the Stereo. (Analog audio  
jacks are usually labeled as such and are  
usually red and white. Coaxial jacks are  
usually black.)  
No sound/power  
• Check if the player is connected securely.  
• Check volume on the player  
• Disconnect headphone when not using  
headphone.  
• Make sure you operate the TV or amplifier  
correctly.  
Disc cannot play  
• Make sure you have selected DVD player  
position on the amplifier.  
• Check you have loaded a disc in the player  
if empty.  
• Check you have loaded a disc properly  
with the label side up.  
• Disc dirty/ damaged. Clean the disc.  
• Moisture has condensed in the player.  
Remove the disc and leave the player to  
adjust to the surrounding temperature.  
• The power circuit in your player is  
designed with a power shutdown mode.  
This is activated only during battery  
power operation of the player when  
the battery becomes completely  
drained. When this happens:  
1 Adjust the POWER switch on the play-  
er to the OFF position.  
2 Connect your player to AC power with  
the supplied power adaptor.  
3 Let the player stand idle for 30 seconds  
before switching on again to resume  
disc operation on AC power supply.  
Remote control does not work  
• Remove obstacles between the remote  
control and the player, and point directly  
instead of at a wide angle at the infrared  
sensor on the player.  
• Battery maybe exhausted. Replace the  
battery with a new one.  
Loud noise when operating the player  
• This is normal and due to mechanical  
parts. Playback is not affected.  
• To avoid interference with other  
electrical equipment, try using the remote  
control with a minimum distance of 7 inch-  
es from the sensor on the player.  
The player feels very warm  
When the player is in use for a long period  
of time, the surface will be heated. This is  
normal.  
38  
 
Troubleshooting  
Disc play is irregular or DVD disc menu  
operation is faulty.  
Image rolls and no color  
• The color system of the player doesn't  
match your TV. Select the correct TV TYPE • Due to the inconsistency of disc formats  
until your TV shows normal color.  
provided by various disc manufacturers,  
your DVD player may require a playability  
enhancement or upgrade. As DVD  
technology has advanced, these enhance-  
ments have become both common and  
easy to complete. Please contact  
Magnavox at 1-800-705-2000 for  
assistance.  
An Audio CD will not play.  
• Some Audio CDs available on the market  
are copy protected.These discs will not  
play on this DVD player. See your retailer  
for options regarding non-protected Audio  
CDs.  
The DVD player will not select some  
features, such as Angles, Subtitles, or  
multi-language Audio.  
• The feature may not be available on the  
disc. If it is not, the  
will appear on  
the TV screen. Check the disc case to see  
if the disc has the feature. If the disc does  
not have the feature, the DVD player  
cannot create the feature.This is not a  
malfunction of the DVD player.  
Or, the feature may not be available at the  
present time. Some features are only  
available during playback, while other  
items can be accessed only when play is  
stopped.Try stopping or starting playback,  
then try the feature again.  
For the latest product information & news visit :  
Environmental information  
We have done our best to reduce the packaging and make it easy to separate into 3 materi-  
als: cardboard, styrofoam, and plastic.  
Your set consists of materials which can be recycled if disassembled by a  
specialized company. Please observe the local regulations regarding the  
disposal of packaging, dead batteries and old equipment.  
39  
 
LIMITED WARRANTY  
PORTABLE DVD PLAYER  
90 days Free Product Exchange / 91 days-One year Reduced-Cost Exchange  
This product must be carried in for an exchange.  
WHO IS COVERED?  
You must have proof of the date of purchase to exchange  
MAKE SURE YOU KEEP...  
Please keep your sales receipt or other document showing  
your product.A sales receipt or other document showing proof of date of purchase.Attach it to the owners manual  
the date that you purchased the product is considered  
such proof.  
and keep both nearby.Also keep the original box and  
packing material in case you need to return your product.  
BEFORE EXCHANGINGTHE PRODUCT...  
Please check your owners manual before exchanging the  
product. Adjustments of the controls discussed there  
may save you time and money.  
WHAT IS COVERED?  
Warranty coverage begins the day you buy your product.  
For 90 days thereafter, you may exchange the defective  
product for a free new or renewed product through  
Magnavox.  
LIMITATION OF LIABILITY AND REMEDY...  
MAGNAVOX IS NOT LIABLE UNDER ANY  
CIRCUMSTANCES FOR ANY DIRECT, INDIRECT,  
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL  
DAMAGES, HOWSOEVER INCURRED, EVEN IF  
NOTIFIED OF THE POSSIBILITY OF SUCH DAMAGES.  
TO THE EXTENT PERMITTED BY LOCAL LAW,THE  
REMEDIES PROVIDED IN THIS WARRANTY  
STATEMENT AREYOUR SOLE AND EXCLUSIVE REMEDY.  
THIS LIMITED WARRANTY GIVESYOU SPECIFIC  
LEGAL RIGHTS,ANDYOU MAY ALSO HAVE OTHER  
RIGHTS WHICHVARY FROM STATE/PROVINCE TO  
STATE/PROVINCE.  
From 91 days to one year from the date of purchase, you will  
pay a preset exchange fee to obtain a new or renewed  
product. Follow the exchange procedures on the next  
page.This exchange opportunity ends one year after the  
date of purchase.The replacement product is covered only  
for the warranty period of the original product.When the  
warranty on the original product expires, the warranty on  
all replaced products also expires.  
When it is necessary for you to ship the product to Magnavox  
for exchange, you will pay the shipping costs for shipment to  
Magnavox. Magnavox will pay the shipping costs when  
returning a product to you.  
TO EXCHANGE YOUR PRODUCT INTHE U.S.A.,  
PUERTO RICO,OR U.S.VIRGIN ISLANDS...  
WHAT IS EXCLUDED?  
Your warranty does not cover:  
FOLLOW THE INSTRUCTIONS STATED PREVIOUSLY  
IN THE WHAT IS COVEREDSECTION, OR REFER TO  
THE EXCHANGE INSTRUCTIONS ON THE NEXT  
PAGE. IN THE U.S.A., PUERTO RICO,AND U.S.VIRGIN  
ISLANDS,ALL IMPLIED WARRANTIES, INCLUDING  
THE IMPLIED WARRANTIES OF NON-INFRINGEMENT,  
MERCHANTABILITY AND FITNESS FOR A PARTICU-  
LAR PURPOSE,ARE SPECIFICALLY DISCLAIMED,AND  
TO THE EXTENT INCONSISTENT WITH LAW OF THE  
LOCALITY OF THE USER, LIMITED IN DURATION TO  
THE DURATION OF THIS EXPRESS WARRANTY.  
BECAUSE SOME STATES DO NOT ALLOW LIMITA-  
TIONS ON HOW LONG AN IMPLIED WARRANTY  
MAY LAST,THIS LIMITATION MAY NOT APPLY TOYOU.  
shipping charges to return defective product.  
labor charges for installation or setup of the product,  
adjustment of customer controls on the product, and  
installation or repair of antenna systems outside of  
the product.  
product repair and/or part replacement because of  
improper installation, abuse, neglect, misuse, accident,  
unauthorized repair or other cause not within the  
control of Magnavox.  
a product that requires modification or adaptation to  
enable it to operate in any country other than the  
country for which it was designed, manufactured,  
approved and/or authorized, or repair of products  
damaged by these modifications.  
incidental or consequential damages resulting from  
the product. (Some states do not allow the exclusion  
of incidental or consequential damages, so the above  
exclusion may not apply to you.This includes, but is  
not limited to, prerecorded material, whether copy-  
righted or not copyrighted.)  
TO EXCHANGE A PRODUCT IN CANADA...  
Please contact Magnavox at:  
1-800-705-2000  
In Canada, this warranty is given in lieu of all other  
warranties.There are no other warranties, express or  
implied, including any implied warranties of  
merchantability or fitness for a particular purpose.  
a product used for commercial or institutional purposes  
(including but not limited to rental purposes).  
REMEMBER…  
Please record below the model and serial numbers found  
on the product.Also, please fill out and mail your  
warranty registration card promptly. It will be easier for  
us to notify you if necessary.  
WHERE IS EXCHANGE AVAILABLE?  
Warranty exchange is available in all countries where the  
product is officially distributed by Magnavox. In countries  
where Magnavox does not distribute the product, the  
local Magnavox service organization will attempt to  
exchange the product, although there may be a delay if  
the appropriate product is not readily available.  
MODEL # __________________________________  
SERIAL #  
__________________________________  
This warranty gives you specific legal rights.You may have other rights which vary from state/province to state/province.  
Magnavox, P.O. Box 520890, Miami, FL 33152, USA, (402) 536-4171  
EL6505E004 / 11-02  
40  
 
LIMITED WARRANTY  
EXCHANGE INSTRUCTIONS  
To exchange your product with Magnavox (per the warranty conditions stated previously), remember:  
If you exchange the product within 90 days of the original purchase, there is no cost to you.*  
If you exchange the product more than 90 days after but less than one year after the day of original purchase,  
contact Magnavox at 1-800-705-2000 to determine the preset cost for exchange.  
If you do not have your original sales receipt, or if you have any questions, call Magnavox at 1-800-705-2000.  
To obtain a replacement product from Magnavox:  
1. Contact Magnavox at 1-800-705-2000 to determine the cost for exchange.  
2. Complete the Exchange Form below.  
3. Pack the product and its accessories in the original box or a suitable alternative.You will receive replacement  
accessories with your replacement product. For packing details, call Magnavox at 1-800-705-2000.  
4. Put the completed Exchange Form, a copy of the original sales receipt, and the proper payment amount into an  
envelope. DO NOT SEND CASH. Do not staple or clip these items together. Label the envelope Return  
Documents Enclosed.Place this envelope in the box with the product.  
5. Seal the box with packing tape and return the product via United Parcel Service (UPS), insured and freight prepaid,  
to the address provided by Magnavox. For details, call 1-800-705-2000.A replacement will be sent to you via UPS  
within 48 business hours of Magnavoxreceipt of the product.  
*When it is necessary for you to ship the product to Magnavox for exchange, you will pay the shipping costs for shipment to  
Magnavox. Magnavox will pay the shipping costs when returning a product to you.  
EXCHANGE FORM  
Your Address (street address to which replacement should be delivered, no P.O. boxes allowed):  
Name:  
Street Address:  
Apt. #:  
City:  
State/Province:  
Phone (night):  
Zip Code/Postal Code:  
Phone (day):  
Exchange Fee: ________________ + SalesTax: ________________ = Total: __________  
Method of Payment: (Check one. Please, no cash or CODs.)  
_____ Check/Money order  
Check/Money order No. _____________________________________  
Account number  
Expiration date  
____________  
____________  
____________  
____________  
_____ American Express  
_____ Visa  
___________________________  
___________________________  
___________________________  
___________________________  
_____ Novus/Discover  
_____ MasterCard  
Signature:________________________________________________________________________________________  
Detailed reason for return, use additional paper if necessary: ________________________________________________  
__________________________________________________________________________________________________  
__________________________________________________________________________________________________  
__________________________________________________________________________________________________  
Model Number ____________________ Serial Number ______________________________________________  
Remember, the return box should include the following:  
The product,  
Completed Exchange Form and sales receipt,  
Accessories supplied with the product, and  
Payment, if applicable.  
41  
 
MAGNAVOX  
A Division of Philips Consumer Electronics North America  
Knoxville, Tennesses 37914-1810, U.S.A  
Meet Magnavox at the Internet  
MPD700  
CLASS 1  
LASER PRODUCT  
IB8449E001  
Printed in China  
BK326  
 

Kuppersbusch USA Cooktop GKS97510 M UL User Manual
LG Electronics Projector HS101 User Manual
LG Electronics Refrigerator LFXS30766D User Manual
Life Fitness Treadmill M051 00K59 0011 User Manual
Lindy Computer Monitor 21519CH User Manual
Lindy Switch 32 341 User Manual
Logic 3 Speaker Logic3 User Manual
Makita MP3 Player 5005BA User Manual
Makita Welding Consumables 4100NH User Manual
McCulloch Chainsaw 576600401 User Manual