Makita Blower BUB360 User Manual

ECHNICAL INFORMATION  
PRODUCT  
T
P 1/ 5  
Models No.  
Description  
BUB360  
Cordless Blower 36V  
L2  
H
CONCEPT AND MAIN APPLICATIONS  
Model BUB360 is a cordless blower powered by 36V/ 2.6Ah  
Li-ion battery BL3626. This model will be one of the best choice  
for use especially in public spaces or among residential areas  
instead of gas-powered blowers.  
L1  
W
Features High/ Low push button for two different air volume settings.  
This product is available with the following model number  
and specifications.  
Model No. Charger Battery Battery cover  
Dimensions: mm (")  
BUB360Z  
No  
No  
No  
Length (L1)  
Length (L2)  
921 (36-1/4)  
436 (17-1/8)  
The model also includes the accessory listed below  
in "Standard equipment".  
Width (W)  
Height (H)  
142 (5-5/8)  
204 (8)  
*L1: Length with Long nozzle  
*L2: Length with without Long nozzle  
Specification  
Model No.  
BUB360  
36  
Voltage: V  
Capacity: Ah  
Battery  
2.6  
Cell  
Li-ion  
22 with DC36RA  
17,000  
Charging time (approx.): min.  
High  
No load speed: min-1 = rpm  
Low  
10,000  
High  
Low  
High  
Low  
Max air volume*1:  
m3/sec (m3/min.) [ft3/min.]  
0.073 (4.4) [160]  
0.043 (2.6) [92]  
93  
57  
Max air velocity*2: m/sec  
Air volume setting function  
Yes (2 settings: High/ Low)  
High  
Low  
14  
30  
No  
No  
Continuous run time (approx.)  
on a single full battery*1: min.  
Vacuum function  
Variable speed control by trigger  
Weight according to  
EPTA-Procedure 01/2003*4: kg (lbs)  
3.1 (6.8)  
*1 without Long nozzle  
*2 with Long nozzle  
*3 with Battery BL3626  
*4 with Battery BL3626 and Long nozzle  
Standard equipment  
Long nozzle .................. 1  
Shoulder strap ............. 1  
Note: The standard equipment for the tool shown above may differ by country.  
Optional accessories  
Battery BL3626, Charger DC36RA, Battery adapter BAN36N  
 
P 2/ 5  
Repair  
CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”.  
[1] NECESSARY REPAIRING TOOLS  
Description  
Use for  
Socket bit 8-55 (width across flats: 8mm) Disassembling/ Assembling M5-8 Hex nut for Fan 95  
[2] DISASSEMBLY/ASSEMBLY  
[2]-1. Fan, Armature  
DISASSEMBLING  
(1) Remove Carbon Brush as illustrated in Fig. 1.  
Fig. 1  
Remove two Holder cap covers by  
levering up with Slotted screwdriver.  
Remove two Brush holder caps and Carbon brushes.  
Carbon brush  
Holder cap cover  
(2pcs.)  
Brush holder cap (2pcs.)  
(2) Separate Housing set (R) and take out Motor section as illustrated in Fig. 2.  
Fig. 2  
Remove 13pcs. of 4x18 Tapping screws.  
And separate Housing set (R) from Housing  
set (L).  
Separate Motor section (Endbell complete, Armature,  
Yoke unit, Fan 95) from Housing set (L).  
Note: Do not lose Hanger  
Housing set (R)  
Housing set (R)  
Hanger  
Housing set (L)  
Motor section  
(3) Fan 95 and Armature can be replaced as illustrated in Fig. 3.  
Fig. 3  
1. Separate Motor section  
from Endbell complete.  
2. Hold Fan 95 by hand and turn M5-8 Hex nut for Fan 95  
clockwise using cordless impactdriver with Socket bit 8-55.  
Note: M5-8 Hex nut has a left handed thread.  
Yoke unit  
Socket bit 8-55 Cordless impactdriver  
Fan 95  
Armature  
Endbell  
complete  
Flat washer 8  
M5-8 Hex nut  
Fan 95  
Fan 95  
Flat washer 5  
 
P 3/ 5  
Repair  
[2] DISASSEMBLY/ASSEMBLY  
[2]-1. Fan, Armature (cont.)  
ASSEMBLING  
Take the disassembling step in reverse.  
Note: 1) Do not forget to set Flat washer 5 and Flat washer 8 in place. (Fig. 3)  
2) Fit two notches of Yoke unit to two protrusions on Housing set (L). (Fig. 4)  
3) Before assembling Housing set (R), mount Hanger on Housing set (L) and (R). (Fig. 2)  
Fig. 4  
Fan 95  
two protrusions of Housing set (L)  
two notches  
of Yoke unit  
[2]-2. Switch unit  
DISASSEMBLING  
(1) Remove Housing set (R) from Housing set (L). (Figs. 1 and 2)  
It is not necessary to remove Motor section.  
(2) Remove Switch unit by disconnect Connectores as illustrated in Fig. 5.  
Fig. 5  
Switch unit  
Housing set (L)  
Connector of Switch unit  
Connector of Controller  
Controller  
ASSEMBLING  
Take the disassembling step in reverse.  
 
P 4/ 5  
Circuit diagram  
Fig. D-1  
Color index of lead wires' sheath  
Black  
Red  
White  
Blue  
Yellow  
Connect Line filters as illustrated below if they are used.  
Housing set (L) side  
Terminal  
Line filter  
Endbell  
complete  
Line filter  
Controller  
Line filter  
Switch  
unit  
Housing set (R) side  
 
P 5/ 5  
Wiring diagram in Housing set (L)  
Fig. D-2  
Line Filter  
Pass Line filter’s Lead wires (black, red)  
through Line filter, and then put the Line  
filter as illustrated below.  
Endbell Complete  
Put Connectors to the position  
Fix the following Lead wires with  
these Lead wire holders.  
* Endbell’s Lead wires (black, red)  
* Controller’s Lad wires (black, red)  
Guide Switch units’s Lead  
illustrated below, and fix  
the Lead wires of Switch unit  
and Controller with Lead wire  
holders.  
wires between Ribs  
carefully not to put them  
on the Ribs.  
Line filter  
Put Insulated  
connectors here.  
Rib  
Connector  
Line filter  
Rib  
Do not pass Controller’s  
lead wire (yellow) between  
Rib and Terminal.  
Terminal  
Endbell  
complete  
Yoke unit  
Wire connecting portion  
Fan 95  
Controller  
Flag connector  
Passing Controller’s Lead wires (black, red) through Line filter,  
coil them one time to Line filter as illustrated below.  
Terminal  
Line filter  
Line filter  
to  
Terminal  
Lead Wire Holder  
Motor section side  
Fix the Lead wires with Lead wire holder.  
The Flag connector has to be  
connected so that its wire  
connecting portion faces  
In case of the specifications without Line filter,  
no need to fix the lead wires with Lead wire holder.  
Motor section side (front side).  
 

Kyocera Cell Phone 32300 User Manual
La Crosse Technology Thermometer WT 62U User Manual
Lance Larkin Coffeemaker Brew Express CoffeeMaker User Manual
Lenoxx Electronics CD Player CDR 190 User Manual
LG Electronics Scale QM9800 User Manual
Magnavox Portable CD Player AZ 2755 User Manual
Makita Cordless Saw 4307D User Manual
Marantz Microcassette Recorder PMD661 User Manual
Market Forge Industries Cookware ST 3E User Manual
McCulloch Lawn Mower M4053CM User Manual