Nady Systems Microphone CM 2S User Manual

CM-2S Stereo Condenser Microphone  
USER GUIDE  
Congratulations on purchasing the Nady CM-2S Stereo Condenser Microphone. This superior, versatile microphone provides the  
realistic spatial impact of a live sound field for many applications including stereo recording, ENG theater use, and FM stereo radio.  
This manual covers the operation of the CM-2S microphone and the available optional accessories. To take full advantage of the  
superb features of your microphone, and to enjoy long and trouble-free use, please read this user’s guide carefully.  
UNPACKING, INSPECTION, STORAGE AND TRANSPORT  
Your CM-2S microphone was carefully packed at the factory, and the shipping carton was designed to protect the unit during shipping.  
Please retain this container in the highly unlikely event that you ever need to return your microphone for servicing.  
OPTIONAL ACCESSORIES  
• Camera Shoe Mount Adapter  
• MST-5B Boom mic stand  
STANDARD ITEMS SUPPLIED  
• CM-2S Stereo Condenser Microphone  
• Mic clip  
• 19" (0.5m) stereo cable (XLRF to 3.5mm stereo mini plug)  
• 10' (3m) stereo cable (XLRF to two 3.5mm mono mini plugs)  
• Two 3.5mm (female) to 1/4" (male) phone plug adapters  
• Foam windscreen  
• Soft, protective leatherette pouch  
• AA battery  
• User guide  
• Warranty card  
FEATURES & OPERATION  
Placing the mic closer to the sound source will create a more  
pronounced stereo image while moving the mic further away will  
lessen the stereo image and result in more room noise. Placing  
a mic too close to a multi-voice source may result is some voices  
being more dominant than others. Experiment with placement  
for the best possible results. Use the low-cut filter switch to  
reduce stage floor noise and undesired low frequencies.  
The CM-2S uses a pair of closely-matched, wide range,  
condenser uni-directional (cardioid) elements, angled at 110° in  
an X/Y stereo configuration. It features superb channel  
separation; smooth, linear 30Hz-20kHz frequency response with  
a switchable low-frequency roll-off; On/Off switch, high SPL  
capability; extended dynamic range with ultra-low self noise;  
crisp, clear transparent audio; and internal battery operation. All  
this contained in a compact, lightweight design for easy camera  
mounting  
Before operating, install an alkaline or mercury AA battery by  
unscrewing, and sliding down, the lower portion of the handle to  
reveal the battery compartment. The CM-2S is only designed for  
battery use.  
The CM-2S has two unbalanced, in-phase, low impedance stereo  
outputs. The Left(+) signal is sent to Pin 2 and the Right(+) signal  
is sent to Pin 3. Both Left and Right use a common Ground(-)  
connection on Pin 1. Use the 19" stereo cable to connect to  
3.5mm stereo inputs or the 10’cable to connect to two channels of  
your mixing console or recording equipment.  
DANGER: DO NOT USE PHANTOM POWER WITH THE  
CM-2S OR YOU COULD DAMAGE THE MICROPHONE.  
Note: Low bias voltages (such as those used for mini-disc, DAT,  
or analog recorders) will not harm the microphone.  
 

Miele Oven H4892BP2 User Manual
Murphy Switch 45HE Series User Manual
National Instruments Stepper Machine NI MID 760X User Manual
NETGEAR MP3 Player EVA9100 User Manual
Nordyne Furnace G5RC User Manual
North Star Pressure Washer M157594I User Manual
Omnimount TV Mount OM10059 User Manual
OPTI UPS Power Supply Standby UPS System User Manual
Oster Can Opener 3126 User Manual
Panasonic Printer JT H200PR User Manual