DIN CONNECTORS
(AXD)
CONNECTORS FOR PC
BOARD TO PC BOARD
UL
DIN Connector conforming to DIN/IEC standards
FEATURES
(for B and C type)
1. 2 pieces connectors conforming to
DIN 41612 and IEC 603-2.
4. Plenty of products with improved
functions
2. Clip contact with reliable
construction on both sides for highly
reliable contact.
The following types are available in
addition to ones with the time difference
contact function.
1) Withstands vibration and shock.
2) Long insertion/removal life and
insertion/removal force is stable.
3) Construction able to withstand
unreasonable twisting when inserting and
removing.
-Flux-tight type that prevents flux from
creeping up from the connector bottom
and terminals.
-Self-clinching bracket, PC board top
mounting type.
5. Constructed to prevent incorrect
insertion.
The construction is designed to prevent
reverse insertion of the connector
according to the DIN standard. We have
taken further measures with a dedicated
key that enables the easy prevention of
incorrect insertion of connectors with
identical poles.
Mating
diagram
Dual surface contacting construction
Incorrect insertion prevention key
3. Supports time difference contact
function.
Compliance with RoHS Directive
1) ICs are protected from damage at
connection even if the PC board is
inserted or removed without power
connected during maintenance or
inspection. This simplifies circuit design.
2) Time difference contacts can be
arranged as desired.
APPLICATIONS
PBX, Factory Automation Equipment
3) Possible for either header or socket.
• Time difference contact function
Header
Time difference
contacts
Standard
contacts
1mm
Socket
Standard
contacts
Time difference
contacts
1.2mm
panasonic-electric-works.net/ac
DIN CONNECTORS (AXD)
INTRODUCTION OF OTHER TYPES
1. FEATURES OF REVERSE TYPE DIN
CONNECTOR
New series of reverse types popular in
Standard type and reverse type
Header/
socket
Terminal
shape
Types
Form
the U.S.A.
Header
Socket
Header
Socket
Angle
Straight
Straight
Angle
1) Shock resistant socket construction
Integrated construction of the flange and
housing prevent damage to the terminals
from shock.
The contacts of the socket mounted on the
mother board (power supply side) are covered
to prevent electrical shock and entry of foreign
matter.
Srandard
Standard
type
header
Standard
socket
Body
1. Reduction of total cost
Since the cost of the header is low, it is more
economical to use the header for mother
boards which require multiple pins for
expansion.
2. Matches the designer's requirements for
maximum simplicity in the mother board design.
Reverse
socket
Reverse
header
Contact
Flange
Reverse
type
2) Box-shaped header provides excellent
electrical performance
Box-shaped headers feature long
insulation distance between the
connector and mounting panel and low
capacitance.
The header and socket for the standard
type and reverse type fit each other,
this permits the connections shown in
the figure on the right.
Standard
socket
Reverse
header
Srandard
header
Reverse
socket
Stacking connection
Horizontal connection
OPEN type
Former product
Mounting panel
BOX type
2. FEATURES AND CONSTRUCTION OF DIN CONNECTOR WITH HIGHER FUNCTION
DIN connector enhancement products
which support user circuit designs and
solve problems that occur during
connector mounting.
• PC board top mounting type
• Self-clinching bracket (with temporary
fastening function)
2) Self-clinching brackets
(with temporary function)
• Prevents the connector from shifting
due to vibration and shock.
• Uses the same mounting hole as the
mounting screw.
4) Time difference contacts
• ICs are protected from damage at
connection even if the PC board is
inserted or removed without power
connected during maintenance or
inspection. This simplifies circuit design.
• A contact time difference of 1mm for
headers and 1.2mm for sockets is
obrained.
mm
• Flux resistant construction
• Time difference contacts
Self-clinching bracket
1) PC board top mounting type
• Prevents the entry of flux during
automatic soldering.
• Large position tolerance when mounting
the connector to the PC board permits
the use of automatic mounting.
• Time difference contacts can be
arranged as desired.
1.6
1.4
Header
Time difference
contacts
Standard
contacts
PC board
mounting hole
2.8 0.05 dia. PC board
1mm
3) Flux resistant construction
The terminals are sealed with resin to
prevent seepage of flux through the
terminals or entry of flux from the bottom
of the connector.
PC board
Socket
Snap off at the notches
after soldering
Standard
contacts
Time difference
contacts
Cross section
1.2mm
PC board edge
mounting type
(DIN connector)
Sealed
Socket
Header
with
resin
panasonic-electric-works.net/ac
DIN CONNECTORS (AXD)
PRODUCT TABLE
Socket
Header
Standard types
Reverse types
R type
Standard types
Reverse types
R type
Type
B type
C type
3 rows
Q type
2 rows
B type
C type
3 rows
Q type
2 rows
2 rows
3 rows
2 rows
3 rows
100
100
100
100
96
96
96
96
90
64
90
64
64
64
64
64
(The middle row
is removed)
64
50
(The middle row
is removed)
(The middle row
is removed)
64
50
(The middle row
is removed)
No. of contacts
Terminal shape
50
44
32
20
50
44
32
20
32
32
PC board top mounting
type
—
—
Available
Available
—
Available
Available
—
Available
Available
—
Available
Available
—
—
—
Self-clinching bracket
(temporary fastening)
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Flux-resistant
construction
Time difference
contacts
—
—
Available
Available
PRODUCT TYPES (STANDARD)
1) B type (standard 2 rows)
2) C type (standard 3 rows)
Shape
Shape
Socket
Header
Socket
Header
Solder-dip
straight terminals
Solder-dip
angle terminals
Solder-dip
straight terminals
Solder-dip
angle terminals
No. of contacts
No. of contacts
Part No.
Part No.
Part No.
Part No.
20
32
AXD120201
AXD132201
AXD144201
AXD150201
AXD164201
AXD190201
AXD100201
AXD220211
AXD232211
AXD244211
AXD250211
AXD264211
AXD290211
AXD200211
64
(The middle row is
removed)
AXD164301
AXD196401
AXD264311
AXD296411
44
96
50
Notes: 1. All are tray packaged. Packing quantity for outer carton is 200 pcs.
2. For the available foreign standard products, refer to “STANDARDS
CHART” on the end of the catalog.
64
90
100
Notes: 1. All are tray packaged. Packing quantity for outer carton is 200 pcs.
2. For the available foreign standard products, refer to “STANDARDS
CHART” on the end of the catalog.
PRODUCT TYPES (REVERSE)
1) Q type (reverse 2 rows)
2) R type (reverse 3 rows)
Shape
Shape
Socket
Header
Socket
Header
Solder-dip
angle terminals
Solder-dip
straight terminals
Solder-dip
angle terminals
Solder-dip
straight terminals
No. of contacts
No. of contacts
Part No.
Part No.
Part No.
Part No.
32
50
AXD132811
AXD150811
AXD164811
AXD100811
AXD232801
AXD250801
AXD264801
AXD200801
64
(The middle row is
removed)
AXD164611
AXD196711
AXD264601
AXD296701
64
96
100
Note: All are tray packaged. Packing quantity for outer carton is 200 pcs.
Notes: 1. All are tray packaged. Packing quantity for outer carton is 200 pcs.
2. Adopting box shape, Q types differ from DIN international standards
(open shape) on the mounting spacing.
panasonic-electric-works.net/ac
DIN CONNECTORS (AXD)
PRODUCT TYPE (HIGHER FUNCTIONAL products)
1.Top mounting types
1) B type (standard 2 rows)
2) C type (standard 3 rows)
Shape
Shape
Header
Header
Solder-dip angle terminals
Part No.
Solder-dip angle terminals
Part No.
No. of contacts
No. of contacts
64
20
32
AXD220201
AXD232201
AXD244201
AXD250201
AXD264201
AXD290201
AXD200201
(The middle row is
removed)
AXD264301
AXD296401
44
96
50
64
90
100
3) Q type (reverse 2 rows)
4) R type (reverse 3 rows)
Shape
Shape
Socket
Socket
Solder-dip angle terminals
Part No.
Solder-dip angle terminals
Part No.
No. of contacts
No. of contacts
32
50
AXD132801
64
(The middle row is
removed)
AXD164601
AXD196701
AXD150801
64
AXD164801
96
100
AXD100801
Notes: 1. All are tray packaged. Packing quantity for outer carton is 200 pcs.
2. For the available foreign standard products, refer to “STANDARDS
CHART” on the end of the catalog.
2.Type with self-clinching bracket
1) B type (standard 2 rows)
2) C type (standard 3 rows)
Shape
Socket
Shape
Header
Socket
Header
(PC board top mounting type)
(PC board top mounting type)
Solder-dip
straight terminals
Solder-dip
angle terminals
Solder-dip
straight terminals
Solder-dip
angle terminals
No. of contacts
No. of contacts
Part No.
Part No.
Part No.
Part No.
20
32
AXD120251
AXD132251
AXD144251
AXD150251
AXD164251
AXD190251
AXD100251
AXD220251
AXD232251
AXD244251
AXD250251
AXD264251
AXD290251
AXD200251
64
(The middle row is
removed)
AXD164351
AXD196451
AXD264351
AXD296451
44
96
50
64
90
100
3) Q type (reverse 2 rows)
4) R type (reverse 3 rows)
Shape
Shape
Socket
Header
Socket
Header
(PC board top mounting type)
(PC board top mounting type)
Solder-dip
angle terminals
Solder-dip
straight terminals
Solder-dip
angle terminals
Solder-dip
straight terminals
No. of contacts
No. of contacts
Part No.
Part No.
Part No.
Part No.
32
50
AXD132851
AXD150851
AXD164851
AXD100851
AXD232851
AXD250851
AXD264851
AXD200851
64
(The middle row is
removed)
AXD164651
AXD196751
AXD264651
AXD296751
64
96
100
Notes: 1. All are tray packaged. Packing quantity for outer carton is 200 pcs.
2. For the available foreign standard products, refer to “STANDARDS
CHART” on the end of the catalog.
panasonic-electric-works.net/ac
DIN CONNECTORS (AXD)
3. Flux resistance types
1) B type (standard 2 rows)
2) C type (standard 3 rows)
Shape
Shape
Socket
Socket
Solder-dip straight terminals
Solder-dip straight terminals
Without self-clinching
With self-clinching
bracket
Without self-clinching
With self-clinching
bracket
bracket
bracket
No. of contacts
No. of contacts
64
(The middle row is
removed)
Part No.
Part No.
Part No.
Part No.
20
32
AXD120221
AXD132221
AXD144221
AXD150221
AXD164221
AXD190221
AXD100221
AXD120271
AXD132271
AXD144271
AXD150271
AXD164271
AXD190271
AXD100271
AXD164321
AXD196421
AXD164371
AXD196471
44
96
50
64
90
100
3) Q type (reverse 2 rows)
4) R type (reverse 3 rows)
Shape
Shape
Header
Header
Solder-dip straight terminals
Solder-dip straight terminals
Without self-clinching
With self-clinching
bracket
Without self-clinching
With self-clinching bracket
Part No.
bracket
bracket
No. of contacts
No. of contacts
Part No.
Part No.
Part No.
32
50
AXD232821
AXD250821
AXD264821
AXD200821
AXD232871
AXD250871
AXD264871
AXD200871
64
(The middle row is
removed)
AXD264621
AXD296721
AXD264671
AXD296771
64
96
100
Notes: 1. All are tray packaged. Packing quantity for outer carton is 200 pcs.
2. For the available foreign standard products, refer to “STANDARDS
CHART” on the end of the catalog.
4. Accessory
5.Time difference contacts
Time difference contacts can be arranged as desired.
Please consult us.
Packaging
Name
Part No.
AXD8001
Inner carton
Outer carton
Incorrect insertion
prevention key
50 pcs.
200 pcs.
Socket
Header
Standard
contacts
Time difference
contacts
Time difference
contacts
Standard
contacts
1.2mm
1mm
panasonic-electric-works.net/ac
DIN CONNECTORS (AXD)
The CAD data of the products with a CAD Data mark can be downloaded from: http://panasonic-electric-works.net/ac
DIMENSIONS of 2 Rows type (Unit: mm)
• B type socket (20, 32, 44, 50, 64, 90 and 100 contacts)
Solder-dip straight terminals
A
B 0.2
C
CAD Data
0.3
2-2.8 dia.
8.0
2.7
11.4
4.9
4.0
0.35
2.54 0.15
2.54 0.15
0.6
D 0.2
General tolerance: 0.3
Dimension table (mm)
Recommended PC board pattern (Bottom view)
No. of
A
B
C
D
0.8+0.1 dia.
0
contacts
2-2.8 0.05 dia.
20
38.72
53.96
69.2
34.12
49.36
64.6
29.12
44.36
59.6
22.86
38.1
32
(8.0)
44
53.34
60.96
78.74
2.54 0.05
50
76.82
94.6
72.22
90.0
67.22
85.0
0.3
64
2.54 0.05
90
127.62 123.02 118.02 111.76
140.32 135.72 130.72 124.46
D 0.1
B 0.1
100
• B type header (20, 32, 44, 50, 64, 90 and 100 contacts)
Solder-dip angle terminals
CAD Data
8.46
PC board
edge mounting top mounting
type type
PC board
D 0.2
C
3.0
2.54 0.15
2.54 0.15
2.54 0.15
2.54 0.15
2.4
12.5
2-2.5+0.1 dia.
0
2.54 0.15
2.80
3.0
Ⅺ0.5
B 0.2
A
General tolerance: 0.3
Recommended PC board pattern (Bottom view)
Standard type
0.8+0.1 dia.
0
2.54 0.05
2.54 0.1
2-2.8 0.05 dia.
5.30 0.1
(Standard type
only)
2.54 0.05
Dimension table (mm)
D 0.1
B 0.1
No. of
A
B
C
D
contacts
20
37.72
52.96
68.2
33.02
48.26
63.5
29.32
44.56
59.8
22.86
38.1
32
44
53.34
60.96
78.74
50
75.82
93.6
71.12
88.9
67.42
85.2
64
90
126.62 121.92 118.22 111.76
139.32 134.62 130.92 124.46
100
panasonic-electric-works.net/ac
DIN CONNECTORS (AXD)
• Q type socket (32, 50, 64 and 100 contacts)
Solder-dip angle terminals
CAD Data
8.0
PC board
edge mounting
type
PC board
top mounting
type
C
6.0
6.0
3.0+0.1
6.5
0
11.32
2.54 0.2
2.54 0.15
2.54 0.2
15.2
64 contacts
2.5
11.32
15.2
2.54 0.15
3.2
2.7
2.9
2.7
2.5
2.54 0.15
0.38t×0.6W
D 0.2 (50, 64 contacts), D 0.3 (100 contacts)
B 0.2
A
General tolerance: 0.3
Recommended PC board pattern (Bottom view)
0.8+0.1 dia.
0
2.54 0.05
2.54 0.1
2-2.8 0.05 dia.
5.3
Dimension table (mm)
No. of
contacts
A
B
C
D
2.54 0.05
D 0.1
B 0.1
32
58.34
81.2
53.34
76.2
44.36
67.22
85.0
38.1
60.96
78.74
50
64
98.98
144.9
93.98
139.7
100
130.72 124.46
• Q type header (32, 50, 64 and 100 contacts)
Solder-dip straight terminals
A
B 0.2
C
CAD Data
8.46
2.8 dia.
E
6.2
64 contacts
11.6
5.2
6.4
4.9
2.50 dia.
4.0
2.7
2.54 0.15
2.54 0.15
Ⅺ0.5
D 0.2 (50, 64 contacts), D 0.3 (100 contacts)
3.2
General tolerance: 0.3
Recommended PC board pattern (Bottom view)
0.8+0.1 dia.
0
2-2.8 0.05 dia.
Dimension table (mm)
No. of
contacts
A
B
C
D
E
2.54 0.05
2.54 0.05
32
57.26
80.12
97.6
53.34
76.2
44.56
67.42
85.35
38.1
60.96
78.74
47.36
70.22
87.87
D 0.1
B 0.1
50
64
93.98
139.7
100
143.62
130.92 124.46 133.72
panasonic-electric-works.net/ac
DIN CONNECTORS (AXD)
DIMENSIONS of 3 Rows type (Unit: mm)
• C type socket (64 and 96 contacts)
Solder-dip straight terminals
94.6
90.0 0.2
85.0
CAD Data
2.-2.8 dia.
0.3
10.5
11.4
4.9
4.0
0.35
2.54 0.15
0.6
2.54 0.15
2.54 0.15
78.74 0.2
General tolerance: 0.3
Recommended PC board pattern (Bottom view)
0.8+0.1 dia.
0
2-2.8 0.05 dia.
(10.5)
0.3
2.54 0.05
2.54 0.05
2.54 0.05
78.74 0.1
90.0 0.1
Note: For 64 contacts type,
the middle row is removed.
• C type header (64 and 96 contacts)
Solder-dip angle terminals
CAD Data
11.0
78.74 0.2
PC board
edge mounting
type
PC board
top mounting
type
85.2
2.4
12.5
2.54 0.15
2.54 0.15
2.54 0.15
2.54 0.15
2-2.5+0.1 dia.
0
2.54 0.15
2.54 0.15
2.54 0.15
2.80
Ⅺ0.5
3.0
88.9 0.2
93.6
General tolerance: 0.3
Recommended PC board pattern (Bottom view)
0.8+0.1 dia.
0
2.54 0.05
2.54 0.05
2.54 0.1
2-2.8 0.05 dia.
5.30 0.1
(Standard type only)
2.54 0.05
78.74 0.1
88.90 0.1
Note: For 64 contacts type,
the middle row is removed.
panasonic-electric-works.net/ac
DIN CONNECTORS (AXD)
• R type socket (64 and 96 contacts)
Solder-dip angle terminals
CAD Data
78.74 0.2
0.38t×0.6W
2.54 0.15
10.5 8.5
PC board
edge mounting
type
PC board
top mounting
type
8.5
8.5
85.0
3.05
2.54 0.2
6.5
12.5
10.1
2.54 0.2
2.54 0.15
2.54 0.15
2.54 0.15
2-2.5 dia.
2.54 0.15
3.0
3.2
88.9 0.2
93.6
General tolerance: 0.3
Recommended PC board pattern (Bottom view)
0.8+0.1 dia.
0
2.54 0.05
2.54 0.05
2.54 0.1
2-2.8 0.05 dia.
5.30 0.1
(Standard type only)
2.54 0.05
78.74 0.1
Note: For 64 contacts type,
the middle row is removed.
88.90 0.1
• R type header (64 and 96 contacts)
Solder-dip straight terminals
94.6
90 0.2
CAD Data
0.3
11.0
85.2
88.0
2-2.8 dia.
2.9
11.6
5.2
4.0
2.54 0.15
2.54 0.15
Ⅺ0.5
2.54 0.15
78.74 0.2
General tolerance: 0.3
Self-clinching bracket
type (Unit: mm)
Recommended PC board pattern (Bottom view)
0.8+0.1 dia.
0
2-2.8 0.05 dia.
Self-clinching bracket
0.3 0.1
2.54 0.05
2.54 0.05
2.54 0.05
1.6
1.4
78.74 0.1
90.0 0.1
PC board
2.8 0.05 dia. PC board
mounting hole
Note: For 64 contacts type, the middle row is removed.
panasonic-electric-works.net/ac
DIN CONNECTORS (AXD)
COMBINATION FORM (mm)
Vertical fixing
Types
Header
Stacking fixing
Horizontal fixing
Standard
Reverse
6.72
1.45
6.91
3.65
Q type
socket
Q type socket
B type header
2.54
B type
header
2.54
PC board edge
mounting type
(DIN standards)
Q type
header
2.72
2.68
16.57
15.15
B type
socket
2.54
2.54
15.07
2.54
0.3
0.3
2.54
2.54
B type socket
2 rows
type
16.65
Q type
header
8.0
2.73
8.46
5.2
2.54
Q type socket
top mounting
type
Q type socket
top mounting type
B type header
top mounting type
2.54
B type header
top mounting
type
2.54
PC board top
mounting type
Q type
header
4.23
4.0
16.57
15.15
B type
socket
2.54
2.54
15.07
0.3
2.54
2.54
9.43
3.63
9.24
3.65
R type socket
C type header
R type
socket
C type
header
2.54
2.54
PC board edge
mounting type
(DIN standards)
3.99
3.93
R type
header
C type
socket
15.15
15.35
2.54
2.54
13.85
0.3
0.3
2.54
0.3
2.54
2.54
2.54
C type socket
16.65
3 rows
type
R type
header
11.0
5.2
10.5
4.95
0.3
R type socket
top mounting type
C type header
top mounting type
R type socket
top mounting
type
C type header
top mounting
type
2.54
2.54
PC board top
mounting type
5.25
5.5
R type
header
15.35
C type
socket
15.15
2.54
2.54
13.85
0.3
2.54
0.3
2.54
2.54
2.54
panasonic-electric-works.net/ac
DIN CONNECTORS (AXD)
NOTES
1. Regarding printed circuit board
design
b) Removal
• Apply uniform force with the lever and
carry out the separation.
8. Method for preventing incorrect
insertion
1) After the incorrect insertion prevention
key is inserted in the designated groove
position, the handle portion should be
broken away.
As the terminal numbers are marked on
the connector, the printed circuit board
design can be carried out based on the
terminal numbers.
Lever
2. Regarding soldering for header and
socket
10
Soldering should be carried out under the
following conditions.
260°C: within 10 seconds
15
300°C: within 5 seconds
350°C: within 3 seconds
5. Determination of the position of the
header and socket should be done as
shown in the following drawings.
a) Tilt
5
The automatic soldering operation should
be carried out for the header after
masking tape is applied as shown below.
0.7
3.3
3.65
Handle portion
Masking tape
(Recommended
tape 3M No. 214)
3. Regarding handling of header and
socket terminals
2) When DIN connectors with the
identical number of contacts are used, for
preventing incorrect insertion between
boards, use the following example as a
reference for the incorrect insertion
prevention keys.
Repeated bending of the terminals can
cause breakage. Care should be taken.
4. Insertion and removal of socket and
header should be carried out with the
following procedure.
b) Offset
Within
1mm
Within
1mm
Example:
a) Insertion
Incorrect insertion is to be prevented for
the 3 connectors A, B, and C.
• After checking to be sure the polarity of
socket and header are correct, the
header side is inserted following the
guide, gently combining with the top of
the socket.
1 to 5: Key way position
6. For multiple use of connectors on
identical boards, sufficient care must
be taken with the mounting
1
2
3
4
5
dimensions and the strength of the
socket side (board and holder).
Guide
Header
Header
B
Socket
Key way
positions
C
*
A
*
A
*
B
*
C
Header
1
2
3
4
5
*
*
*
*
Socket
*
*
• Uniformly push the upper edge of the
printed circuit board of the header side so
that the header enters the socket until it
butts against the socket flange.
*: Locations for inserting the incorrect insertion
preventing key
Socket
9. In case where external shock or
vibration can be applied to PC boards,
there is the possibility that the header
and socket of the connector can be
separated.Therefore it is
7. By using max. 34.3N {3.5kgf}
torque, tighten the screws with flat
washer.
recommended that the shock or
vibration prevention method such as
guide rail should be provided.
Butting
For other details, please verify with the
product specification sheets.
panasonic-electric-works.net/ac
|