Magnadyne M9900CDS User Manual

R
Installation  
and Operations  
Manual  
POWER  
EJECT  
IR  
4 X 50 WATTS  
ELAPSE  
VOLUME  
PUSH SEL/  
MENU  
MODE  
AS/PS  
DIM  
/ II  
LOUD  
MUTE  
TUNE/TRACK/CH  
PUSH  
SCAN/S-MOD  
EQ  
DISP  
ENTER  
BAND  
MEMORY  
PROGRAM  
REPEAT  
SHUFFLE  
INTRO  
W-BND  
DISC/CAT  
M9900CDS  
AM / FM / WB and CD Stereo Receiver  
U.S. Patent No. D486,815  
Button Locations and Functions  
5. Multi-Function Button #2:  
Radio Mode: Push and hold until a beep is heard to memorize a radio station into memory #2 (CH2).  
Push and release when recalling preset radio station #2.  
CD Mode: Push to play programmed CD tracks (see CD Operation for more information, page 6-7).  
CD Changer Mode: Push to change to a higher number disc in the CD changer.  
Sirius Satellite Radio Mode: Push to scroll through the Sirius Radio playback categories.  
6. Multi-Function Button #3:  
Radio Mode: Push and hold until a beep is heard to memorize a radio station into memory #3 (CH3).  
Push and release when recalling preset radio station #3.  
CD Mode: Push to repeat a CD track. Push again to cancel.  
CD Changer Mode: Push to repeat a CD track. Push again to cancel.  
Push and hold to repeat the entire disc. Push again to cancel.  
7. Multi-Function Button #4:  
Radio Mode: Push and hold until a beep is heard to memorize a radio station into memory #4 (CH4).  
Push and release when recalling preset radio station #4.  
CD Mode: Push to play all the tracks on the CD in random order. Push again to cancel.  
CD Changer Mode: Push to play all the tracks on the CD in random order. Push again to cancel.  
Push and hold to play all the CDs in random order. Push again to cancel.  
8. Multi-Function Button #5:  
Radio Mode: Push and hold until a beep is heard to memorize a radio station into memory #5 (CH5).  
Push and release when recalling preset radio station #5.  
CD Mode: Push to preview each track on the CD for 10 seconds. Push again to cancel.  
CD Changer Mode: Push to preview each track on the CD for 10 seconds. Push again to cancel.  
Push and hold to preview each track on every CD for 10 seconds. Push again to cancel.  
9. Band Button: Push to select F1, F2, F3, AM1, AM2 or W (weather band).  
10. Weather Band Radio Button: Push to instantly access the weather band radio. Push mode to return to  
previous source.  
11. Reset Button: Push to reset the unit to it’s “DEFAULT” settings.  
12. Display Button: Push to display the frequency in radio mode or track in CD mode. Push and hold to  
perform clock setting functions (See Clock Setting for more information, page 6)  
13. Equalizer Button: Push to choose between preset sound equalization settings.  
14. Mute Button (CD Play/Pause) Button:  
Radio and Sirius Satellite Radio Mode: Push to mute volume level. Push again to restore volume.  
CD and CD Changer Mode: Push to pause disc play, push again to resume play.  
15. Loud (Dim Button): Push and release to boost high and low tones at low volume levels. Push and  
hold to dim or restore backlight of display.  
16. AS/PS (CD Elapse Button):  
Radio Mode: Push for automatic memory storing and preset scan.  
CD and CD Changer Mode: Push to display running time/remain time of a CD track.  
17. Mode Button: Push to change the play source: Radio, Sirius Satellite Radio, CD, CD Changer or  
Auxiliary Sources.  
18. Eject Button: Push to eject a CD.  
19. CD Slot: To play a CD, insert CD into slot with label facing up.  
20. Display Area: This area displays all function information for the radios, clock and CD players.  
3
Basic Operation  
POWER  
Turning the Unit On and Off: Push the Power button.  
Selecting Play Source: Push the Mode button to choose a play source:  
Radio, Sirius Satellite Radio (if equipped), CD, External CD Changer (if  
equipped or Auxiliary Sources (if equipped).  
MODE  
AS/PS  
DIM  
/ II  
Dimming the Display: Push and hold the LOUD button to dim the backlight  
of the display. Push and hold again to return to normal illumination.  
LOUD  
MUTE  
AM/FM Radio Operation  
AM/FM Bands: Push BAND button to select a radio band: F1, F2, F3, AM1,  
AM2 or W (weather band).  
BAND  
W-BND  
TUNE/TRACK/CH  
Manual Tuning:  
PUSH  
SCAN/S-MOD  
1. Rotate the TUNE knob left or right and hold until “MANUAL” appears  
in the display, then release knob.  
2. Rotate the TUNE knob again left or right until the desired radio sta-  
tion appears in the display.  
TUNE/TRACK/CH  
PUSH  
Scan Tuning: Push the TUNE knob to have the radio automatically scan  
every 5 seconds for a different radio station. To stop scanning push the  
TUNE knob again.  
SCAN/S-MOD  
TUNE/TRACK/CH  
PUSH  
SCAN/S-MOD  
Seek Tuning: Rotate the TUNE knob left or right, then release to seek for a  
different radio station.  
Preset AM/FM Radio Stations  
Programming AM/FM Radio Stations: You can program up to 15 FM radio  
stations and 10 AM radio stations.  
1. Select from F1, F2, F3, AM1 or AM2 by pushing the BAND button  
repeatedly.  
BAND  
W-BND  
2. Tune to the desired radio station (see AM/FM Radio Operation above  
for more details).  
3. Push and hold one of the five STATION RECALL buttons  
until a short "beep" is heard. The corresponding preset  
MEMORY  
PROGRAM  
REPEAT  
SHUFFLE  
INTRO  
button number now appears in the lower right hand cor-  
ner of the display.  
4. To program additional preset stations, repeat this procedure using the  
other STATION RECALL buttons.  
4
(continued)  
Preset AM/FM Radio Stations  
Automatically Programming AM/FM Radio Stations: You can program up to 15  
FM radio stations and 10 AM radio stations automatically.  
BAND  
MODE  
W-BND  
1. Select from F1, F2, F3, AM1 or AM2 by pushing the BAND button  
repeatedly.  
ELAPSE  
AS/PS  
2. Push and hold AS/PS button until the display starts scanning for a  
radio station. The radio will automatically program the 5 strongest sta-  
tion into preset memory.  
Recalling AM/FM Radio Stations:  
BAND  
W-BND  
1. Select from F1, F2, F3, AM1 or AM2 by pushing the BAND button  
repeatedly.  
2. Push button 1, 2, 3, 4 or 5 to recall a pre-programmed  
radio station.  
MEMORY  
PROGRAM  
REPEAT  
SHUFFLE  
INTRO  
Automatically Recalling AM/FM Radio Stations:  
BAND  
MODE  
W-BND  
AS/PS  
1. Select from F1, F2, F3, AM1 or AM2 by pushing the BAND button  
repeatedly.  
2. Push the AS/PS button and release to automatically scan every 5 seconds  
the through pre-programmed radio stations. To stop scanning push the  
AS/PS button again.  
Weather Band Radio Operation  
Weather Band: Push W-BND button to immediately access the weather band.  
The radio will search for the strongest weather band signal in your area.  
BAND  
W-BND  
Scan Tuning: Push the TUNE button (3) to scan every 5 seconds through all  
7 weather band stations. To stop scanning push the TUNE knob again.  
TUNE/TRACK/CH  
PUSH  
SCAN/S-MOD  
Sound Controls  
VOLUME  
PUSH SEL/  
MENU  
Volume Control: Rotate the VOLUME knob to the right to increase levels or  
left to decrease levels.  
VOLUME  
PUSH SEL/  
MENU  
Bass, Treble, Balance and Fader Controls: Push and release the VOLUME knob  
to scan between the different sound controls. Once the desired function is in  
the display area rotate the knob left or right to achieve the desired level.  
Bass Control: The bass control adjusts the amount of low frequency that  
you hear.  
4
X
50 WATTS  
H
NU  
SEL/  
LOC  
Treble Control: The treble control adjusts the amount of high frequency  
that you hear.  
USH  
SCAN/S-MOD  
VOLUME  
Balance Control: The balance control adjusts the amount of sound output  
to the left and right speakers.  
PUSH SEL/  
MENU  
Fader Control: The fader control adjusts the amount of sound output to  
the front and rear speakers.  
5
(continued)  
Sound Controls  
Equalizer: Push the EQ button to choose between preset equalizer settings:  
Classic, Rock, DSP Off (digital sound processor off), Flat, Pop and Jazz,  
as indicated in the display area.  
EQ  
DISP  
Mute (CD Play/Pause) Button: Push the MUTE button to mute the radio  
volume. If a CD is playing the MUTE button will pause the CD. Push the  
MUTE button again to restore the volume or resume playing the CD.  
LOUD  
LOUD  
MUTE  
MUTE  
Loudness: Push the LOUD button to boost high and low tones at low  
volume levels.  
Clock Setting  
Display Button: Push and hold the DISP button until the clock is flashing in  
the display.  
EQ  
DISP  
TUNE/TRACK/CH  
Adjusting the Minutes: Rotate the TUNE knob to the Left to adjust the Minutes.  
PUSH  
SCAN/S-MOD  
Adjusting the Hours: Rotate the TUNE knob to the Right to adjust the Hours.  
Note: the AM/PM indicators.  
When correct time displays wait a few seconds to allow the time to program.  
Minutes  
Hours  
CD Operation  
Playing a CD: Insert a CD (label side up) into the CD slot. The CD will auto-  
load and start playing.  
Note: If a CD does not auto-load DO NOT FORCE into the slot, as you may  
already have a CD loaded.  
TUNE/TRACK/CH  
PUSH  
SCAN/S-MOD  
CD Track Selection: Rotate the TUNE knob left or right to change the track. The  
track number will appear in the display.  
DIM  
/ II  
MUTE  
Pausing a CD: Push the MUTE button to “Pause” the disc, push again to  
resume play.  
LOUD  
EJECT  
Ejecting a CD: Push the EJECT button to to eject a disc.  
Repeating a CD Track: Select the desired track to repeat then push the  
REPEAT button until “S-RPT” appears in the display. The track on the disc  
will play repeatedly. To cancel this feature push the REPEAT button until  
“S-RPT” disappears from the display.  
REPEAT  
Random CD Track Play Order: Push the SHUFFLE button until “S-SHF” appears  
in the display. The tracks on the disc will play in a random order. To cancel this  
feature push the SHUFFLE button until “S-SHF” disappears from the display.  
SHUFFLE  
Preview CD Tracks: Push the INTRO button until “S-SCN” appears in the  
display. Each track on the disc will play for 10 seconds. To cancel this fea-  
ture push the INTRO button until “S-SCN” disappears from the display.  
INTRO  
ELAPSE  
AS/PS  
Elapse Times: Push the AS/PS button to display running time of CD track,  
push the button again to display the time remaining on the CD track, push  
one more time to display time remaining on CD.  
MODE  
6
(continued)  
CD Operation  
Programming CD Tracks into Memory:  
1. In the CD mode, push the MEMORY button once. “P-01”will be  
displayed.  
MEMORY  
TUNE/TRACK/CH  
PUSH  
SCAN/S-MOD  
2. Select the desired track on the CD by rotating the TUNE knob.  
3. Push the MEMORY button again to store that track into memory.  
MEMORY  
4. Repeat Steps 2 and 3 to store up to 30 tracks into memory.  
Note: To clear program memory, push the MEMORY button once during  
programmed playback. “CLEAR” will be displayed.  
Playing Programmed CD Tracks:  
1. Push the Program button to playback programmed tracks in memory.  
“PGM” will appear in the upper right corner of the display. To return to  
normal playback mode, push the PROGRAM button again.  
PROGRAM  
CD Changer Operation  
Load CD’s: Insert the CD magazine into the external CD changer  
Selecting the External CD Changer: Push the MODE button until “CDC”  
MODE  
AS/PS  
appears in the display.  
CD Selection: Push button 1 or 2 to scroll through the selection of CD’s in the  
CD changer. If a CD is not in one of the trays, the unit will continue until the  
next CD is found.  
MEMORY  
PROGRAM  
DISC/CAT  
TUNE/TRACK/CH  
CD Track Selection: Rotate the TUNE knob left or right to change the track. The  
PUSH  
SCAN/S-MOD  
track number will appear in the display.  
Repeating a CD Track: Select the desired track to repeat then push and  
release the REPEAT button and “RPT” appears in the display. The track  
on the disc will play repeatedly. To cancel this feature push the REPEAT  
button and “RPT” disappears in the display.  
REPEAT  
Repeating a CD: Select the desired CD to repeat then push and hold the  
REPEAT button and “DPT” appears in the display. The disc will play  
repeatedly. To cancel this feature push the REPEAT button and “DPT”  
disappears from the display.  
Random CD Track Play Order: Push and release the SHUFFLE button until  
“SHF” appears in the display. The tracks on the disc will play in a random  
order. To cancel this feature push the SHUFFLE button until “SHF”  
disappears from the display.  
Random CD Play Order: Push and hold the SHUFFLE button until “DSF”  
appears in the display. The discs will play in a random order. To cancel this  
feature push the SHUFFLE button until “DSF” disappears from the display.  
SHUFFLE  
7
(Continued)  
CD Changer Operation  
Preview CD Tracks: Push and release the INTRO button until “SCN” appears  
in the display. Each track on the disc will play for 10 seconds. To cancel  
this feature push the INTRO button until “SCN” disappears from the display.  
INTRO  
Preview CDs: Push and hold the INTRO button until “DSN” appears in the  
display. Each track on every disc will play for 10 seconds. To cancel this  
feature push the INTRO button until “DSN” disappears from the display.  
Sirius Satellite Radio Setup  
Note: If your Sirius tuner is not activated, call 1-888-539-SIRIUS to activate. The Sirius Tuner ID Number  
(ESN) is required during the activation process. Following the instructions below to access the Sirius  
Tuner ID Number (ESN):  
Accessing you Sirius Tuner ID Number (ESN):  
MODE  
AS/PS  
1. Push the MODE button until “SIRIUS” appears in the display area.  
TUNE/TRACK/CH  
PUSH  
SCAN/S-MOD  
2. Push the TUNE button until “DIRECT” appears in the display area. Wait a  
few seconds and “CH 000” will then appear in the display.  
3. Push the BAND button and the first 4 digits of the 12 digit Sirius Tuner ID  
BAND  
EQ  
W-BND  
Number (ESN) will be displayed.  
4. Push the DISP button and the last 8 digits of your 12 digit Sirius Tuner  
ID Number (ESN) will be displayed.  
DISP  
TUNE/TRACK/CH  
PUSH  
SCAN/S-MOD  
5. Push the TUNE button to exit.  
Sirius Satellite Radio Operation  
Please note that satellite radio signal may be blocked by trees, buildings, bridges or tunnels.  
Selecting Sirius Satellite Radio: Push the MODE button until “SIRIUS”  
MODE  
AS/PS  
appears in the display. Please be patient as it may take a minute to receive a  
satellite signal.  
TUNE/TRACK/CH  
Manual Tuning:  
PUSH  
SCAN/S-MOD  
1. Push the TUNE knob until “NORMAL” appears in the display.  
2. Rotate the TUNE knob to select a station from 01-182.  
TUNE/TRACK/CH  
Category Tuning:  
PUSH  
SCAN/S-MOD  
1. Push the TUNE knob until “CATEGORY” appears in the display.  
2. Push button 1 or 2 to find the desired category.  
MEMORY  
PROGRAM  
DISC/CAT  
8
Sirius Satellite Radio Operation (Continued)  
TUNE/TRACK/CH  
Category Tuning (continued):  
PUSH  
SCAN/S-MOD  
3. Rotate the TUNE knob and select a station.  
TUNE/TRACK/CH  
Direct Tuning:  
PUSH  
SCAN/S-MOD  
1. Push the TUNE knob until “DIRECT” appears in the display.  
2. Rotate the TUNE knob and select the first digit (0 or 1).  
3. Push the TUNE knob again.  
4. Rotate the TUNE knob and select the second digit (1-8).  
5. Push the TUNE knob again.  
TUNE/TRACK/CH  
PUSH  
SCAN/S-MOD  
6. Rotate the TUNE knob and select the third digit (1-9). The tuner will  
start playing the station you have selected when the third digit stops  
flashing.  
Preset Sirius Satellite Radio Stations  
Programming Satellite Radio Stations: You can program up to 20 Sirius  
Satellite radio stations.  
1. Select from SR1, SR2, SR3 or SR4 by pushing the BAND button  
repeatedly.  
BAND  
W-BND  
2. Tune to the desired radio station (see Sirius Satellite Radio Operation  
for more details).  
3. Push and hold one of the five STATION RECALL buttons  
until a short "beep" is heard. The corresponding preset  
MEMORY  
PROGRAM  
REPEAT  
SHUFFLE  
INTRO  
button number now appears in the lower right hand  
corner of the display.  
4. To program additional preset stations, repeat this procedure using the  
other STATION RECALL buttons as desired.  
Recalling Satellite Radio Stations:  
BAND  
W-BND  
1. Select from SR1, SR2, SR3 or SR4 by pushing the BAND button  
repeatedly.  
2. Push button 1, 2, 3, 4 or 5 to recall a pre-programmed  
radio station.  
MEMORY  
PROGRAM  
REPEAT  
SHUFFLE  
INTRO  
Automatically Recalling Satellite Radio Stations:  
BAND  
MODE  
W-BND  
AS/PS  
1. Select from SR1, SR2, SR3 or SR4 by pushing the BAND button  
repeatedly.  
2. Push AS/PS button and release to automatically scan every 5 seconds  
the pre-programmed radio stations. To stop scanning push the AS/PS  
button again.  
9
Channel Skip Sirius Satellite Radio  
Programming Channel Skip for Satellite Radio Stations: You can program  
the radio to skip channels which you do not want.  
1. Tune to the station to be skipped (see Sirius Satellite Radio Operation  
for more details).  
TUNE/TRACK/CH  
PUSH  
SCAN/S-MOD  
2. Push the TUNE knob until “SET SKIP” appears in the display.  
ENTER  
3. Push the BAND button and “SKIP” will appear flashing in the bottom of  
the display. When the “SKIP” stops flashing the channel has been pro-  
grammed to skip.  
BAND  
W-BND  
TUNE/TRACK/CH  
Release Channel Skip for Satellite Radio Stations:  
PUSH  
SCAN/S-MOD  
1. Push the TUNE knob until “DIRECT” appears in the display.  
2. Rotate the TUNE knob and select the first digit of the skipped channel (0  
or 1).  
TUNE/TRACK/CH  
3. Push the TUNE knob again.  
PUSH  
SCAN/S-MOD  
4. Rotate the TUNE knob and select the second digit of the skipped channel  
(1-8).  
5. Push the TUNE knob again.  
6. Rotate the TUNE knob and select the third digit of the skipped channel  
(1-9). The tuner will start playing the station you have selected when the  
third digit stops flashing.  
TUNE/TRACK/CH  
PUSH  
SCAN/S-MOD  
7. Push the TUNE knob until “SET SKIP” appears in the display. After a few  
seconds the radio channel will appear in the display with “SKIP” flash-  
ing at the bottom.  
ENTER  
8. Push the BAND button and “SKIP” will stop flashing in the bottom of the  
display. When the “SKIP” disappears the channel has been released from  
Channel Skip.  
BAND  
W-BND  
Auxiliary Input  
Selecting Auxiliary Input: Push the MODE button until “AUX1” or “AUX2”  
appears in the display which indicates that the auxiliary unit is playing  
through the M9900CDS.  
MODE  
AS/PS  
Note: All sound controls (pages 5-6) are active when the Auxiliary source  
is playing.  
10  
Speciality Features  
Display Button: The factory default setting is clock display priority. Push the  
DISPLAY button at any time will display the radio frequency, CD track,  
AUX 1 or AUX 2.  
EQ  
DISP  
Note: In the Sirius mode the factory default setting is Sirius channel dis-  
play priority. Push the DISPLAY button at any time to display the  
CN-NAME, SONG TITLE, ARTIST, CATEGORY and Clock. If clock is cho-  
sen the time will be displayed for approximately 5 seconds then revert to  
displaying the Category.  
Reset Button: The radio panel or LCD display may fail to function normally  
due to the vehicle’s battery condition, and may require resetting the radio  
microprocessor if:  
LOUD  
MUT  
DIS  
• The vehicle has been “jump started” from a dead battery condition.  
• The vehicle battery becomes very low and is quick-charged.  
• The vehicle battery is removed and replaced.  
EQ  
ENTER  
BAND  
Should this condition occur, simply press and release the RESET button  
on the radio panel using the tip of a ball point pen. This will reset the  
radio microprocessor to the original factory settings. After pressing the  
RESET button you should recheck to see if the radio functions normally.  
All station programming should remain, but you will have to reset the  
clock. Should the LCD display area show any abnormal error code, please  
refer to the trouble shooting guide and solution chart below.  
INTRO  
W-B  
Error Code Problem  
Description  
Possible Remedy  
ERR 1  
Mechanism Problem Unknown mechanical  
problem with the CD  
1. Eject the disc and try another.  
2. Press the reset button.  
3. Replace the unit.  
mechanism.  
ERR 2  
TOC Reading Error  
Laser can not read the  
CD disc table of  
contents.  
1. Insert a different disc.  
2. Check disc for excessive scratches.  
3. Check disc for dirt and fingerprints.  
Clean disc and reinsert.  
ERR 3  
ERR 4  
Error from High  
Ambient Temp.  
The temperature of the Reduce the temperature inside the vehicle  
mechanism is too high and try to play a CD at a later time.  
to play CDs without  
damaging them.  
Laser Focus Error  
Laser pickup fails to  
1. Insert a different disc.  
focus and read the disc. 2. Check disc for excessive scratches.  
3. Check disc for dirt and fingerprints.  
Clean disc and reinsert.  
4. Press the reset button.  
ERR 6  
ERR 7  
CD Loading Error  
Laser Servo Error  
The loading mechanism 1. Push the reset button.  
is damaged.  
2. Replace the unit.  
Laser servo is not  
functional.  
1. Press the reset button.  
2. Replace the unit.  
11  
Default Settings  
The M9900CDS has a small group of settings that can be changed to suit your personalized requirement.  
VOLUME  
Button Confirmation Beep: The factory default setting is BEEP ON (a confirma-  
tion beep every time a button or knob is pushed). To turn the beeps off, push  
PUSH SEL/  
MENU  
and hold the VOLUME knob until “BEEP ON” is in the display then release.  
Rotate the VOLUME knob until “BEEP OFF” is in the display. Wait a few  
seconds, the radio will return to last radio mode selected.  
Power Up Volume Level: The factory default setting for initial power-up volume  
level is 12. To change the initial volume level, push and hold the VOLUME  
VOLUME  
PUSH SEL/  
MENU  
knob until “BEEP ON” is in the display then release. Push the VOLUME knob  
until “P-VOL” is in the display. Rotate the VOLUME knob until the desired ini-  
tial volume is achieved. Wait a few seconds, the radio will return to last radio  
mode selected.  
Radio Frequency Display: The factory default setting is USA. Do not change this  
setting.  
Clock Display When the Radio is Off: When the ignition key is on and the radio  
is off, “clock display on” is the default setting. To change the setting to “clock  
VOLUME  
PUSH SEL/  
MENU  
display off”, push and hold the VOLUME knob until “BEEP ON” is in the dis-  
play then release. Push the VOLUME knob until “CLK ON” is in the display.  
Rotate the VOLUME knob until “CLK OFF” is in the display. Wait a few  
seconds, the radio will return to last radio mode selected.  
Display Priority: The factory default setting for display priority is “CLOCK”  
VOLUME  
PUSH SEL/  
MENU  
except in Sirius mode. To change the display priority (either radio frequency  
priority or no priority), push and hold the VOLUME knob until “BEEP ON” is in  
the display then release. Push the VOLUME knob until “CLOCK” is in the dis-  
play. Rotate the VOLUME knob until “FREQ” or “NO PRI” is in the display. Wait  
a few seconds, the radio will return to last radio mode selected.  
Clock Type, 12 hour or 24 hour: The factory default setting is 12 hour clock with  
AM and PM indication. To change the clock type to 24 hour military time,  
push and hold the VOLUME knob until “BEEP ON” is in the display then  
release. Push the VOLUME knob until “12 HOUR” is in the display. Rotate the  
VOLUME knob until “24 HOUR” is in the display. Wait a few seconds, the  
radio will return to last radio mode selected.  
VOLUME  
PUSH SEL/  
MENU  
12  
Installation  
White Wire with Black Stripe: Connect this wire to  
the Left Front Speaker (-) negative terminal or wire.  
S
tep 1: The radio chassis is designed to be “Sleeve  
Mounted” through a opening in the dashboard panel.  
The required opening size is 182mm (7-3/16") x  
84mm (3-5/16"). Cut or engage an opening in the  
dashboard to accommodate the mounting sleeve.  
Green Wire with Black Stripe: Connect this wire to  
the Left Rear Speaker (-) negative terminal or wire.  
Green Wire: Connect this wire to the Left Rear  
Speaker (+) positive terminal or wire.  
Step 2: Insert the mounting sleeve into the hole  
in the dashboard. Bend the metal tabs on the  
sleeve to secure the mounting sleeve to the dash-  
board.  
Gray Wire: Connect this wire to the Right Front  
Speaker (+) positive terminal or wire.  
Gray Wire with Black Stripe: Connect this wire to the  
Right Front Speaker (-) negative terminal or wire.  
Step 3: Bring all wiring for the connection of the  
unit (including the antenna) through the center of  
the mounting sleeve. Connect the wiring as follows:  
Purple Wire with Black Stripe: Connect this wire to  
the Right Rear Speaker (-) negative terminal or wire.  
Yellow Wire (w/Fuse): Connect this wire to a con-  
stant +12 volt power source (a power source that  
is not controlled by the ignition key).  
Purple Wire: Connect this wire to the Right Rear  
Speaker (+) positive terminal or wire.  
Note: This unit is designed to connect to (4) four  
speakers. If the installation only requires (2) two  
speakers, use the White and Gray wire sets to con-  
nect the speakers.  
Red Wire: Connect this wire to a switched +12 volt  
power source (a power source turned on and off  
by the ignition key).  
Blue Wire: Connect this wire to the (+) power  
antenna activation circuit. If no power antenna  
exists, tape-off the end of this wire to prevent  
shorting out the unit.  
WARNING! Any wires left unconnected must  
be taped-off or capped off to prevent shorting.  
DO NOT connect speaker ground wires together.  
DO NOT connect speaker ground wires to the  
chassis of the vehicle.  
Black Wire: Connect this wire to the frame of the  
vehicle (ground). This wire is the chassis ground-  
ing wire for the unit.  
DO NOT connect front and rear speaker wires  
together.  
White Wire: Connect this wire to the Left Front  
Speaker (+) positive terminal or wire.  
FAILURE TO FOLLOW ANY OF THESE WARNINGS  
WILL RESULT IN DAMAGE TO THIS UNIT AND  
VOIDS THE WARRANTY.  
Sheet  
Metal  
Screw  
Nut  
Washer  
POWER  
VOLUME  
PUSH SEL/  
MENU  
TUNE/TRACK  
Metal Strap  
Dashboard  
LO  
C
SCAN/SHIFT  
ME  
EJECT  
M
OR  
Y
PRO2  
G
RA  
M
ELAPSE  
MO  
D
D
3
REPE  
AS  
/
AT  
IM  
PS  
4
LOU  
S
H
/
II  
D
U
FF  
LE  
MU  
DI  
T
5
SC  
EQ  
A
N
S
P
BA  
N
D
W-  
B
AN  
Mounting Sleeve  
13  
Speaker Connection  
Right  
Front Speaker  
Right  
Rear Speaker  
-
+
+
-
Purple Wire: Rear Right Speaker (+)  
Purple/Black Wire: Rear Right Speaker (-)  
Gray/Black Wire: Front Right Speaker (-)  
Gray Wire: Front Right Speaker (+)  
Green Wire: Rear Left Speaker (+)  
Green/Black Wire: Rear Left Speaker (-)  
White/Black Wire: Front Left Speaker (-)  
White Wire: Front Left Speaker (+)  
-
+
+
-
Left  
Front Speaker  
Left  
Rear Speaker  
Black Wire: Ground  
Blue Wire: Power Antenna  
Red Wire: Ignition Switched 12 VDC  
See Amplifier Instructions  
for Proper Connections  
Yellow Wire: 12 VDC Constant  
1 AMP  
Audio Amplifier  
Sirius Tuner Connection (Optional)  
M9900CDS  
M9SIR  
Male/Male Mini Din  
(Supplied with Sirius Tuner)  
14  
Auxiliary Connection  
Red (Right)  
VCR  
or  
White (Left)  
AUX 1  
Yellow  
Cable  
TV  
Audio Out  
M9900CDS  
AUX 2  
Black  
Cable  
DVD  
or  
Red (Right)  
White (Left)  
Video  
Game  
CD Changer Connection  
CD Changer  
M9900CDS  
Male/Male  
(Supplied with CD Changer)  
Black  
Remote IR Sensor Connection (Optional)  
M9900CDS  
Remote IR Sensor  
(Mounted In-Dash)  
Black  
15  
Warranty  
ONE (1) YEAR LIMITED WARRANTY  
Magnadyne Corporation or its authorized agents will within one year from the date of sale  
to you, repair, replace or refund the retail sales price of said product or any part thereof, at  
the option of the Magnadyne Corporation or its authorized agents, if said product or part  
is found defective in materials or workmanship, when properly connected and operating on  
the correct power requirements designated for the specific product. This warranty and  
Magnadyne Corporation or its authorized agent’s obligations hereunder do not apply where  
the product was; damaged while in the possession of the consumer, subjected to unrea-  
sonable or unintended use, not reasonably maintained, utilized in commercial or industrial  
operations, or serviced by anyone other than Magnadyne Corporation or its authorized  
agents, or where the warning seal on the product is broken or the power and/or plugs are  
detached from the unit. Magnadyne Corporation or any of its authorized agents will not  
assume any labor costs for the removal and reinstallation of any product found to be defec-  
tive, or the cost of transportation to Magnadyne Corporation or its authorized agents. Such  
cost are the sole responsibility of the purchaser.  
This warranty does not cover the cabinet appearance items or accessories used in con-  
nection with this product, or any damage to recording or recording tape, or any damage to  
the products resulting from improper installation, alteration, accident, misuse, abuse or  
acts of nature.  
MAGNADYNE CORPORATION OR ITS AUTHORIZED AGENTS SHALL NOT BE LIABLE TO  
ANYONE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES OR CLAIMS EXCEPT THOSE  
ACCORDED BY LAW. NO EXPRESSED WARRANTY OR IMPLIED WARRANTY IS GIVEN  
EXCEPT THOSE SET FORTH HEREIN. NO IMPLIED WARRANTY SHALL EXTEND BEYOND  
ONE YEAR FROM THE DATE OF SALE.  
This warranty extends only to the original purchaser of the product and is not  
transferable. Some states do not allow limitations on how long an implied warranty lasts,  
and some states do not allow the exclusion or limitation of incidental or consequential  
damages, so the above limitations or exclusion may not apply to you. This warranty gives  
you specific legal rights, and you may have other rights that vary from state to state.  
“NOTE: The manufacturer is not responsible for any radio or TV interference caused by  
unauthorized modifications to this equipment. Such modifications could void the User’s  
authority to operate the equipment.”  
Defective merchandise should be returned to the original point of purchase or  
secondly, to Magnadyne Corporation, 1111 W. Victoria Street, Compton CA 90220.  
Return Authorization must be obtained before sending, or merchandise may be refused.  
M9900CDS-UM Rev. D  
© Copyright 2006  
Magnadyne Corporation  
4-26-06  

Raypak 30B User Manual
PYLE Audio Multi Media Mobile Audio System PLCD88USMP User Manual
Oster 2606 User Manual
Olympus LS 20M User Manual
Olympus BLS 1 User Manual
Nikon Laser IRT User Manual
Kenwood Car Stereo System KDC X917 User Manual
JVC LVT1055 001A User Manual
JVC KV MH6500 User Manual
JVC KS LH4R User Manual