HP Hewlett Packard 52 D2828A User Manual

HP D2828A  
HP52  
15-inch Color Monitor  
13.8-inch Viewable Image  
User’s Guide  
Moniteur couleur 15 pouces  
Affichage 13,8 pouces  
Guide de l’utilisateur  
English.................................................... Chapter 1  
Français.................................................. Chapitre 2  
1
0.28 mm dot pitch for  
excellent graphics  
Non-glare, anti-static, screen  
coating  
Full scan screen that gives  
an edge to edge image  
On/Off switch  
Controls for brightness, contrast, image  
Status indicator  
position, and image geometry.  
HP D2828A  
15-inch Color Monitor  
13.8-inch Viewable Image  
User’s Guide  
HP 15” Color Monitor User’s Guide  
Important Safety Instructions  
Important Safety Instructions  
Before you plug in your new monitor, read these important safety  
instructions.  
WARNING  
Connect the monitor only to a grounded power outlet. Use the power  
cord supplied with the monitor or one with a properly grounded plug.  
Ensure the cable meets your country’s standards for safety.  
To completely disconnect power from the monitor, remove the power  
cord from the power outlet. Ensure that the power outlet is easily  
accessible.  
To avoid electric shock. do not remove the cover or back. There are no  
user serviceable parts inside.  
The monitor is quite heavy (the weight is shown in the technical  
specifications). We recommend you ask the assistance of a second  
person when lifting or moving it.  
USA and Canada  
If the power cord is not supplied with your monitor, select the proper  
power cord according to your national electric safety codes.  
USA: use a UL Listed detachable power cord, type SVT.  
Canada: use a CSA certified detachable power cord.  
Si le cordon secteur n’est pas livré avec votre moniteur, utiliser un  
cordon secteur en accord avec votre code électrique national.  
USA: utiliser un cordon secteur UL Listé, de type SVT.  
Canada: utiliser un cordon secteur certifié CSA.  
2 English  
HP 15” Color Monitor User’s Guide  
What Your New Monitor Offers  
What Your New Monitor Offers  
Your HP52 monitor is a 15-inch (13.8-inch viewable image), high  
resolution, multi-synchronous color monitor. Multi-synchronous means  
that the monitor supports a range of video modes. It is optimized to be used  
with all Hewlett-Packard PCs.  
Your HP color monitor has the following features:  
A 15-inch flat square tube, with a 13.8-inch viewable image, and  
0.28 mm dot pitch for excellent graphics.  
Anti-static, non-glare silica coating to minimize reflection.  
Support of VGA and Ergonomic VGA (640×480),  
Super VGA and Ergonomic Super VGA (800×600) and  
Ultra VGA (1024×768 non-interlaced) solutions.  
85 Hz refresh rate in VGA and SVGA(VESA1 standard) giving a  
flicker free image and reduced eye strain.  
Image adjustment using digital controls on the front panel. You can  
adjust the image size, position and geometry.  
Display power management system (VESA standard) controlled  
from suitably equipped HP PCs to automatically reduce the power  
consumption of the display. As an Energy Star Partner,  
Hewlett-Packard has determined that this product meets the Energy  
Star guidelines for energy efficiency.  
Complies with MPRII guidelines for upper limits of electrical and  
electrostatic emissions, from the Swedish National Board for  
Measurement and Testing.  
Monitor Plug and Play capability (VESA DDC1/2B standard) that enables  
the monitor to identify itself to suitably equipped HP PCs.  
Compliance with ISO 9241-3, ISO 9241-7 and ISO 9241-8 ergonomic  
standards.  
1.  
VESA is the Video Electronics Standards Association.  
English 3  
HP 15” Color Monitor User’s Guide  
Setting Up Your Monitor  
Setting Up Your Monitor  
Attaching the Tilt and Swivel Base  
Your display has a tilt and swivel base. To fit and tilt the swivel base:  
1 Turn the monitor on its side (never on the screen). Identify the front  
of the base.  
2 Locate the slots in the underside of the display.  
3 Slide the base towards the front of the display until the locking tab  
on the base clicks into place.  
1
2
3
Where to Place the Monitor  
Place your monitor on a flat sturdy surface.  
Ensure the operating site is free from excessive heat, moisture, dust  
and sources of electromagnetic fields. Sources of electromagnetic  
fields include transformers, motors, and other monitors.  
Avoid exposing the monitor to direct sunlight.  
4 English  
HP 15” Color Monitor User’s Guide  
Setting Up Your Monitor  
Connecting the Cables  
CAUTION  
Before you connect any cables, or install your HP monitor, refer to the  
safety instructions at the beginning of this manual. Refer also to the  
user manual which accompanies your PC and video adapter to ensure  
this equipment is correctly installed.  
1 Make sure that your PC and monitor are switched off.  
2 Connect one end of the video cable to the video outlet of your PC,  
and the other end to the video input of your monitor. Tighten the  
thumbscrews on the plugs.  
3 Connect the power cord to the monitor.  
4 Plug the power cord into a grounded power outlet.  
1 PC and Monitor OFF  
2
Video cable  
3
4
Power cords  
NOTE  
The location of your PC’s video outlet may be different to the one shown  
in the diagram. Refer to the manual that came with your PC, if  
necessary.  
English 5  
HP 15” Color Monitor User’s Guide  
Using Your Monitor  
Using Your Monitor  
You can adjust the quality, position, size and shape of the displayed  
image by using the adjustment controls on the front panel.  
The new settings are saved 20 seconds after making the adjustment.  
The indicator lights on the front panel light up at the same time to show  
the new settings have been saved.  
When you reach the maximum or minimum value for an adjustment, the  
adjustment indicator light blinks on and off.  
On/Off Switch  
Status Indicator  
Lights indicate which  
adjustment is selected  
Use these buttons to  
select an image  
adjustment  
Use these buttons to  
make the adjustment  
NOTE  
Your monitor is automatically demagnetized each time it is switched  
ON. This ensures color purity. To maintain color purity, we recommend  
that each week you switch the display off for at least 30 minutes before  
switching it on again.  
Brightness  
To adjust the overall picture brightness (image black level), use this  
adjustment.  
Contrast  
Width  
To adjust the contrast (image white level), use this adjustment.  
To adjust the width of the displayed image, use this adjustment.  
6 English  
HP 15” Color Monitor User’s Guide  
Using Your Monitor  
Horizontal Centering  
To adjust the horizontal size of the displayed image, use this adjustment.  
To adjust the height of the displayed image, use this adjustment  
Height  
Vertical Centering  
To adjust the vertical position of the displayed image, use this  
adjustment.  
Pincushion Correction To adjust the displayed image if its vertical edges appear to bow in or  
out, use this adjustment.  
Trapezoid Correction  
To adjust the displayed image if its vertical edges do not appear  
parallel, use this adjustment  
FACTORY SETTINGS  
To return to the factory settings, press the buttons shown below  
simultaneously. The factory settings give optimum values for most  
adjustments.  
SELECT +  
ADJUST +  
English 7  
HP 15” Color Monitor User’s Guide  
Using Your Monitor  
Setting the Amount of Displayed Information  
To set the amount of displayed information, change the screen  
resolution of your PC. The higher the screen resolution, the more  
information you can see on the screen. It is recommended that you use  
a resolution of 800×600 at 85Hz. This gives easy-to-read characters, a  
large amount of displayed information, and a flicker-free image.  
You can make adjustments to the displayed image and they are  
automatically saved for the resolution you are using. For example, if  
you adjust your monitor when working in SVGA those settings are  
saved for SVGA. If you then work in VGA and change the image  
settings, they are saved for VGA. The next time you switch back to  
SVGA, your previous settings are used automatically.  
To find out which resolutions are supported by your monitor, refer to  
“What Video Modes are Supported” on page 10. To change the screen  
resolution, please refer to the manual that came with your PC or your  
operating system documentation, if necessary.  
Your monitor has a Plug and Play capability (VESA DDC1/2B standard)  
that enables it to identify itself to suitably equipped HP PCs. This will  
automatically give you the best refresh rate for the resolution that you  
have set.  
Minimizing Eye Strain  
To avoid screen flicker and minimize eye strain, use the highest  
supported image refresh rate for the chosen resolution, for example  
85 Hz for 800 × 600. The image refresh rate is the number of times per  
second that the image is refreshed.  
To find out which image refresh rates are supported by your monitor,  
refer to “What Video Modes are Supported” on page 10. To set the  
image refresh rate (also known as the vertical frequency), refer to the  
manual that came with your PC or your operating system  
documentation, if necessary. If your PC supports Plug and Play, it will  
automatically select the best refresh rate for the screen resolution you  
have set.  
8 English  
HP 15” Color Monitor User’s Guide  
Using Your Monitor  
Minimizing Energy Consumption  
Your monitor has energy saving capabilities. If your PC supports VESA  
monitor power management, your monitor will be able to enter the  
following modes:  
Standby Mode. This mode uses less than 60W. In this mode the  
screen blanks and the monitor's front panel indicator light is  
constantly amber. The monitor remains active, but no image is  
displayed. Move your mouse or press a key to instantly restore the  
monitor's image.  
Suspend Mode. This mode uses less than 5W. In this mode the screen  
blanks, and the monitor's front panel indicator light is constant  
amber. To reactivate the screen, move your mouse or press a key.  
The monitor will restore the image after a few seconds.  
Off Mode. This mode uses less than 5W. The screen blanks and the  
monitor's front panel indicator light blinks rapidly in amber.  
To set these power saving modes. refer to the manual that came with  
your PC. If your screen is not displaying an image, check the front  
panel indicator light first - your monitor may be in a power saving  
mode.  
English 9  
HP 15” Color Monitor User’s Guide  
What Video Modes are Supported  
What Video Modes are Supported  
Your monitor supports the video modes shown in the table below.  
Screen Resolution  
Image Refresh Rate  
Video Solution  
640×400  
640×480  
640×480  
640×480  
800×600  
800×600  
800×600  
1024×768  
70 Hz  
60 Hz  
75 Hz  
85 Hz  
60 Hz  
75 Hz  
85 Hz  
60 Hz  
VGA  
VGA  
Ergonomic VGA  
Ergonomic VGA  
Super VGA  
Ergonomic Super VGA  
Ergonomic Super VGA  
Ultra VGA 1024  
CAUTION  
All LEDs will flash when the frequency is out of range. Selecting a video  
mode on your PC with a screen resolution/image refresh rate  
combination higher than 1024×768 at 60Hz can damage your monitor.  
10 English  
HP 15” Color Monitor User’s Guide  
Technical Specifications  
Technical Specifications  
Size  
15-inch flat screen/ 13.8-inch viewable image  
Phosphorous  
Dot pitch  
Red, Green, Blue P22 (medium short persistence)  
0.28 mm  
PICTURE TUBE  
Face Plate  
Video  
Anti-glare, anti-static, silica coating  
0.7 Vp analog RGB  
INPUT SIGNAL  
INTERFACE  
Synchronization  
Input Connector  
TTL level separate synchronisation (negative/positive)  
15-pin mini D-SUB  
Horizontal  
Vertical  
30 to 54kHz  
50 to 120 Hz  
SCANNING FREQUENCY  
30 minutes to reach optimum performance level  
65 MHz  
WARM-UP TIME  
PIXEL CLOCK  
283×212mm (maximum size)  
100-240 Vac / 50-60Hz. 75W max.  
DISPLAY SIZE  
POWER SOURCE  
Temperature  
Humidity  
10 °C to 40 °C (operating)  
OPERATING ENVIRONMENT  
STORAGE ENVIRONMENT  
20% RH through 90% RH (without condensation)  
-20 °C to +60 °C  
Temperature  
Humidity  
10% RH through 95%RH  
376(W) × 373(H) × 385(D) mm (including pedestal)  
CABINET DIMENSIONS  
WEIGHT  
12.5 kg (27.5 lbs)  
Tilt Angle  
- 5° to +15°  
-45° to +45°  
TILT/SWIVEL STAND  
Swivel Angle  
English 11  
HP 15” Color Monitor User’s Guide  
Care and Cleaning  
Care and Cleaning  
Do not place anything on top of the monitor. Doing so may block the  
monitor vents and cause damage to the monitor due to overheating.  
Do not let liquid get on or into the monitor.  
To maximize screen life and prevent damage to the picture tube (such  
as burned phosphor due to leaving the same image on the screen for a  
long time), it is recommended that you:  
Use the monitor power management system (on HP PCs) or a screen  
saver program.  
Avoid setting contrast and brightness to their maximum levels for  
prolonged periods.  
If you do not have a power management system or a screen saver  
program, switch the monitor off or reduce the brightness and  
contrast to minimum levels when the monitor is not in use.  
Your monitor has an anti-glare, anti-static screen coating. To prevent  
damage to the monitor screen’s coating, use a regular household glass  
cleaner when cleaning the screen. To clean the screen:  
1 Switch the monitor off and remove the power plug (pull the plug, not  
the cable).  
2 Wet a soft cotton cloth with the cleaning solution and gently wipe the  
screen. Do not spray cleaner onto the screen because the cleaner  
may drip inside the monitor.  
3 Dry with a clean, soft cotton cloth.  
Do not use cleaning solutions containing fluoride, acids, or alkalis.  
12 English  
HP 15” Color Monitor User’s Guide  
Environmental Information  
Environmental Information  
HP has a strong commitment toward the environment. Your HP  
monitor has been designed to respect the environment as much as  
possible.  
HP can also take back your old monitor for recycling when it reaches  
the end of its useful life.  
HP has a product take-back program in several countries. The  
collected equipment is sent to of HP’s recycling facilities in Europe or  
the USA. As many parts as possible are reused. The remainder is  
recycled. Special care is taken for batteries and other potentially toxic  
substances, which are reduced to non-harmful components through a  
special chemical process. If you require more details about HP’s  
product take-back program, contact your dealer or your nearest HP  
Sales Office.  
The cathode ray tube used in this monitor does not contain cadmium.  
English 13  
HP 15” Color Monitor User’s Guide  
Hardware Warranty  
Hardware Warranty  
PART I - HP General Hardware Warranty  
General  
This HP Monitor Hardware Warranty Statement gives you, the customer, express warranty rights  
from HP, the manufacturer.  
FOR CONSUMER TRANSACTIONS IN AUSTRALIA AND NEW ZEALAND: THE WARRANTY  
TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO THE EXTENT LAWFULLY  
PERMITTED, DO NOT EXCLUDE, RESTRICT OR MODIFY AND ARE IN ADDITION TO THE  
MANDATORY STATUTORY RIGHTS APPLICABLE TO THE SALE OF THIS PRODUCT TO YOU.  
THE LAWS OF YOUR COUNTRY MAY PROVIDE FOR DIFFERENT WARRANTY RIGHTS. IF SO,  
YOUR AUTHORIZED HP DEALER OR HP SALES AND SERVICE OFFICE CAN PROVIDE YOU  
WITH DETAILS  
Warranty repair or replacement  
Model  
Warranty Period  
1 year  
Service provided  
On-site service  
Model D2828A  
Hewlett-Packard (HP) warrants this monitor hardware product, or accessory against defects in  
materials and workmanship for the applicable warranty period stated above, commencing from  
the date of delivery of the product to the end-user customer.  
HP does not warrant that the HP hardware will operate uninterrupted or error free.  
If, during the product warranty period, HP is unable, within a reasonable time, to repair or replace  
your product to the condition as warranted, you will be entitled to a refund (in the amount of the  
product purchase price) upon prompt return of the product to your authorized HP dealer or other  
HP designate. Unless otherwise stated or agreed upon in writing with HP, all hardware  
components must be returned for refund with the entire system process unit.  
HP software is covered by the HP Software Product Limited Warranty located in your HP product  
manual.  
Unless otherwise stated, and to the extent permitted by local law, hardware products may contain  
remanufactured parts (equivalent to new in performance) or parts which may have been subject  
to prior incidental use. HP may repair or replace hardware products (i) with products which are  
equivalent in performance to the products being repaired or replaced but which may have been  
subject to prior use, or (ii) with products which may contain remanufactured parts equivalent to  
new in performance or parts which may have been subject to prior incidental use.  
Proof of Purchase and Warranty Period  
In order to receive service or support for your hardware product for the warranty period, proof of  
the original purchase date of the product may be required in order to establish the delivery date of  
your product. If the delivery date is not available, either the purchase date or the manufacturer's  
date (located on the product) becomes the beginning of the warranty period.  
14 English  
HP 15” Color Monitor User’s Guide  
Hardware Warranty  
Limitation of Warranty  
Warranty does not apply to defects resulting from: (a) improper or inadequate maintenance or  
calibration; (b) software, interfacing, parts or supplies not supplied by HP; (c) unauthorized  
repair, maintenance, modification or misuse; (d) operation outside of the published operating  
specifications for the product; (e) improper site preparation or maintenance; or (f) such other  
exclusions as may be expressly set forth in this Warranty Statement.  
HP MAKES NO OTHER EXPRESS WARRANTY, WHETHER WRITTEN OR ORAL, WITH  
RESPECT TO THIS PRODUCT.  
TO THE EXTENT ALLOWED BY APPLICABLE LOCAL LAW, ANY IMPLIED WARRANTY OF  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED TO THE  
DURATION OF THE EXPRESS WARRANTY SET FORTH ABOVE.  
Limitation of Liability and Remedies  
TO THE EXTENT ALLOWED BY APPLICABLE LOCAL LAW, THE REMEDIES IN THIS  
WARRANTY STATEMENT ARE YOUR SOLE AND EXCLUSIVE REMEDIES. IN NO EVENT  
SHALL HP BE LIABLE FOR LOSS OF DATA OR FOR DIRECT, INDIRECT, SPECIAL,  
INCIDENTAL, OR CONSEQUENTIAL DAMAGE, WHETHER BASED ON WARRANTY  
CONTRACT, TORT, OR ANY OTHER LEGAL THEORY.  
The foregoing limitation of liability shall not apply in the event that any HP product sold  
hereunder is determined by a court of competent jurisdiction to be defective and to have directly  
caused bodily injury, death, or property damage. To the extent allowed by applicable local law,  
HP's liability for property damage does not exceed the greater of $50,000 or the purchase price of  
the specific product that caused such damage.  
PART II - Year 2000 Warranty  
Subject to all of the terms and limitations of the HP Limited Warranty Statement provided with  
this HP Product, HP warrants that this HP Product will be able to accurately process date data  
(including, but not limited to, calculating, comparing, and sequencing) from, into, and between  
the twentieth and twenty-first centuries, and the years 1999 and 2000, including leap year  
calculations, when used in accordance with the Product documentation provided by HP  
(including any instructions for installing patches or upgrades), provided that all other products  
(e.g. hardware, software, firmware) used in combination with such HP Product(s) properly  
exchange date data with it. The duration of the Year 2000 warranty extends through January 31,  
2001.  
English 15  
HP 15” Color Monitor User’s Guide  
Regulatory Information  
Regulatory Information  
DECLARATION OF CONFORMITY  
according to ISO/IEC Guide 22 and EN 45014  
Manufacturer’s Name:  
HEWLETT-PACKARD France  
Manufacturer’s Address:  
5, Avenue Raymond Chanas - EYBENS  
38053 GRENOBLE CEDEX 09 - FRANCE  
declares, that the product:  
Product Name:  
HP 52 15-inch Color Monitor  
D2828A  
Model Number:  
conforms to the following product specifications:  
SAFETY  
EMC  
International: IEC 60950:1991 +A1 +A2 +A3 +A4 / GB4943-1995  
Europe: EN 60950:1992 +A1 +A2 +A3 +A4  
- CISPR 22:1993+A1+A2/ EN 55022:1994+A1+A2 Class B 1)  
-EN 50082-1:1992  
IEC 801-2:1992 / prEN 55024-2:1992 - 4kV CD, 8kV AD  
IEC 801-3:1984  
- 3V/m  
IEC 801-4:1988 / prEN 55024-4:1992 - 1 kV Power Lines  
-IEC 555-2:1982+A1:1985 / EN60555-2:1987  
-IEC 61000-3-3:1994 / EN61000-3-3:1995  
-GB9254-1988  
-
-FCC Title 47 CFR, Part 15 Class B 2)  
Supplementary information: The product herewith complies with the requirements of the following Directives and carries the CE-mark-  
ing accordingly:  
EMC Directive 89/336/EEC and Low Voltage Directive 73/23/EEC, both amended by the Directive 93/68/EEC.  
1) The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.  
2) This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and  
(2) This device must accept any interference received, including interference that may cause undesired operation.  
Jean Marc JULIA  
Grenoble,May,1999  
Quality Manager  
For Compliance Information ONLY, contact:  
USA contact: Hewlett Packard Company, Corporate Product Regulations Manager,3000 Hanover Street,  
Palo Alto, CA 94304. (Phone (415) 857-1501)  
16 English  
HP 15” Color Monitor User’s Guide  
Regulatory Information  
Notice for the USA: FCC Statement  
Federal Communications Commission (FCC) Radio  
Frequency Interference Statement (USA Only)  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part  
15 of the FCC Rules. These limits are designed to provide reasonable protections against harmful interference in  
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try one of more of the following measures:  
Relocate the radio or television antenna.  
Move the computer away from the radio or television.  
Plug the computer into a different electrical outlet, so that the computer and the radio or television are on  
separate electrical circuits.  
Make sure that all your peripheral devices are also FCC Class B certified.  
Make sure you use only shielded cables to connect peripheral devices to your computer.  
Consult your computer dealer, Hewlett-Packard, or an experienced radio/television technician for help.  
WARNING  
Hewlett-Packard’s system certification tests were conducted with HP-supported peripheral devices and HP  
shielded cables, such as those you received with your system. Cables used with this computer must be properly  
shielded to comply with the requirements of the FCC.  
Changes or modifications not expressly approved by Hewlett-Packard could void the user’s authority to operate  
the equipment.  
X-Ray Radiation Notice  
When operating, this product emits x-rays; however, it is well shielded and meets the safety and health  
requirements of various countries, such as the Radiation Act of Germany and the Radiation Control for Health  
and Safety Act of the United States.  
Radiation emitted by this product is less than 0.1 mR/hr (1uSv/hr) at a distance of 10 centimeters from the  
surface of the cathode ray tube. The x-ray radiation primarily depends on the characteristics of the cathode ray  
tube and its associated low voltage and high voltage circuitry. Internal controls have been adjusted to ensure  
safe operation. Only qualified personnel should perform any internal adjustments as specified in the service  
manual for this product.  
Replace the cathode ray tube with an identical CRT only.  
General Notice  
The HP D2828A 15-inch Color Monitors have been tested according to MPR 1990:8 for Emission properties and  
meets the guidelines as given by MPR 1990:10 (2.01 - 2.04)  
Notice for Canada  
This Class “B” digital apparatus meets all requirements of the Canadian Interference-Causing Equipment  
Regulations.  
Cet appareil numérique de la Classe B respecte toutes les exigences du règlement sur le matériel brouilleur du  
Canada.  
English 17  
HP 15” Color Monitor User’s Guide  
Regulatory Information  
18 English  
Paper not bleached with chlorine  
Part Number: 5969-1931  
Printed 03/99 in Malaysia  

Hotpoint DDP 700 User Manual
GE ZHU36RSMSS User Manual
FUNAI MSD805 User Manual
EVGA nForce 123 YW E175 User Manual
Elo TouchSystems 1727L User Manual
Electrolux Air O Convect 269002 User Manual
Cypress CY7C027V User Manual
Compaq L1906 User Manual
Black Box Computer Hardware VX HDMI IP MRX User Manual
Addonics Technologies 1_1 HDD DUPLICATOR PRO S HDUSI325AES User Manual