ADDONICS TECHNOLOGIES
Model: AEUDMACF, AEUDMACFWP (read-only)
ADDONICS TECHNOLOGIES
Model: AEUDMACF, AEUDMACFWP (read-only)
4-Pin Molex
4-Pin Molex
40-Pin IDE
Connector
40-Pin IDE
Connector
Power Connector
Power Connector
Power & drive
activity LED
Master or Slave
Setting
Power & drive
activity LED
Master or Slave
Setting
CF/MD Slot
CF/MD Slot
Step 1 Mount the IDE-CF Adapter PRO on a 3.5” drive bay.
Step 1 Mount the IDE-CF Adapter PRO on a 3.5” drive bay.
Step 2 Connect a 4-pin Molex power cable from the PC power supply to
Step 2 Connect a 4-pin Molex power cable from the PC power supply to
the 4-pin Molex power connector on the IDE-CF Adapter PRO.
the 4-pin Molex power connector on the IDE-CF Adapter PRO.
Step 3 By default, the IDE-CF Adapter PRO is set as a master device. Set
jumper on IDE Master mode or Slave mode (J5 ON = Master, J5 OFF =
Slave)
Step 3 By default, the IDE-CF Adapter PRO is set as a master device. Set
jumper on IDE Master mode or Slave mode (J5 ON = Master, J5 OFF =
Slave)
Step 4 Connect 40-pin IDE connector to IDE controller on motherboard
Step 4 Connect 40-pin IDE connector to IDE controller on motherboard
using IDE flat cable.
using IDE flat cable.
Note:
Note:
The IDE-CF Adapter PRO supports hot swap.
The IDE-CF Adapter PRO supports hot swap.
TECHNICAL SUPPORT (8:30 am to 6:00 pm PST)
TECHNICAL SUPPORT (8:30 am to 6:00 pm PST)
Phone:
Email:
408 453-6212
Phone:
Email:
408 453-6212
|
Addlogix TV Receiver IV 2020 User Manual
Agilent Technologies Satellite Radio E4406A User Manual
Agilent Technologies Weather Radio OmniBER 718 User Manual
Agri Fab Lawn Sweeper 45 03201 User Manual
Alto Shaam Kitchen Entertainment Center 500 S Series User Manual
Amana Refrigerator ABD2533DEB User Manual
Amana Refrigerator XRSR687BW User Manual
American DJ DJ Equipment Stingray User Manual
Audiovox Automobile Electronics APS 45 User Manual
Beko Clothes Dryer dc 1560 User Manual