Extron electronic Switch AAP 314 User Manual

AAP 314 and AAP 424 • Installation Guide

Follow the steps below to install an AAP 314 or AAP 424 mounting frame, along with the

Decora^®modules and AAPs of your choice.

Using the supplied mud ring as a guide, mark and cut out the

appropriate material within the marked area.

Insert the mud ring into the opening, and rotate the locking

arms.

Run all required cables from the output or input

device location, behind the wall and to the Decora

module.

Mount the cabled Decora module into the mud ring. Feed cables

through the mud ring as necessary.

AAP

Mount the AAPs to the AAP 314 or AAP 424.

Connect the remaining cables to the AAPs.

(2) #6-32 x 1/2" screws

AAP

Use the provided screws to mount the AAP 314 or AAP 424

to the mud ring assembly, feeding the cables through the

mud ring as necessary.

(2) #6-32 x 1/4" screws

68-2521-50

Rev. A

11 13

Extron USA Headquarters

+1.800.633.9876 (Inside USA/Canada Only)

Extron USA - West:

Extron USA - East:

+1.714.491.1500

+1.919.850.1000

FAX: +1.714.491.1517

FAX: +1.919.850.1001

All trademarks mentioned are the property of their respective owners. www.extron.com